do rear discs need bearings?

[vngtx]

i ordered 2 rear discs for my 2.0 8v cupra (the hub type discs) and was wondering if they need bearings pressing into them? they have very odd looking bore inside the hub part of the discs. there seems to be 2 seperate bearings on the old ones, inside and outside.

 

[cupra-8v]

Bump! Had my discs off yesterday and noticed the same thing, didnt want to risk anything so just changed the pads for now, any info.....

 

[M1KEH]

It's easier to buy new bearings than it is too punch the old ones out and put them in the new discs.

 

[jenk]

Don't think the bearings are much, when I changed mine the first time around I used the bearings out the old disks. Best go new though.

 

[vngtx]

is there 2 bearings in each disc?

 

[M1KEH]

2 bearings one each side. They are taper rollers so you tighten the hub nut just enough to take out the play.

 

[cupra-8v]

the bearings did come out my old disc quite easily..... was going to just put it back together in the disc but the bearings didnt seem to fit right, am i right in saying there is only one type of bearing for the ibiza?