do rear discs need bearings?

vngtx

Guest
i ordered 2 rear discs for my 2.0 8v cupra (the hub type discs) and was wondering if they need bearings pressing into them? they have very odd looking bore inside the hub part of the discs. :confused: there seems to be 2 seperate bearings on the old ones, inside and outside.
 
Last edited by a moderator:

cupra-8v

Active Member
Aug 28, 2009
102
0
Bump! Had my discs off yesterday and noticed the same thing, didnt want to risk anything so just changed the pads for now, any info.....
 
Feb 20, 2005
3,476
0
Telford ay it...
Don't think the bearings are much, when I changed mine the first time around I used the bearings out the old disks. Best go new though.
 

M1KEH

M1KE
Oct 27, 2007
2,336
0
The Middle
2 bearings one each side. They are taper rollers so you tighten the hub nut just enough to take out the play.
 
Last edited:

cupra-8v

Active Member
Aug 28, 2009
102
0
the bearings did come out my old disc quite easily..... was going to just put it back together in the disc but the bearings didnt seem to fit right, am i right in saying there is only one type of bearing for the ibiza?