Ok so my electric window packed up last night, on the passenger side. As iv tried to put it back up there is a hobbible grinding noise.
So this morning iv had the door card off, which was so easy by the way..not as bad as i thought it would be, and on inspection, after removing the motor assembly, it turns out that the wire inside (behind the metal interior) has snapped off and curled up....so i see this as being the problem...
The question is.....Iv unbolted the inner panel, (10mm nuts) but there are 4 ally rivets holding it on still, so before i go an drill them out, any advice?? Are they important???? and do they need replacing if i do drill them out...
As for the cable thing inside..what is it called so i can order a new one tommorrow, any help would be most appreciated fellas,
Cheers
Matt.
So this morning iv had the door card off, which was so easy by the way..not as bad as i thought it would be, and on inspection, after removing the motor assembly, it turns out that the wire inside (behind the metal interior) has snapped off and curled up....so i see this as being the problem...
The question is.....Iv unbolted the inner panel, (10mm nuts) but there are 4 ally rivets holding it on still, so before i go an drill them out, any advice?? Are they important???? and do they need replacing if i do drill them out...
As for the cable thing inside..what is it called so i can order a new one tommorrow, any help would be most appreciated fellas,
Cheers
Matt.