engine wont start fault code 01314

[p34ch3y]

cars been spot on for a while now was fittng a fron lower strut brace today and when i gave up trying to undo the bolts i whent to start my car i forgot i left it in gear so it juted foward sightly anyway took it out of gear whent to start it agian and all it will do now is turn over...all i can get on the vag com is code (01314 engine control module)

can any help me out on this one as to what has happend and what i need to to,do i just need to replace this,any ider on cost ect ect

 

[lemonslap]

cars been spot on for a while now was fittng a fron lower strut brace today and when i gave up trying to undo the bolts i whent to start my car i forgot i left it in gear so it juted foward sightly anyway took it out of gear whent to start it agian and all it will do now is turn over...all i can get on the vag com is code (01314 engine control module)

can any help me out on this one as to what has happend and what i need to to,do i just need to replace this,any ider on cost ect ect

Check the ecu connections its located under the scuttle panel mate

 

[Cupra20]

We tried the ecu mate all looks ok, Peachey a did a search and some say it could be a MAF so it might be worth trying a new one of them first.

 

[p34ch3y]

i tried starting it with the maf unpluged but no joy

 

[lemonslap]

i tried starting it with the maf unpluged but no joy

Have you checked for fuel and spark?

 

[p34ch3y]

spark ok i think,had the coil packs of and the spark plugs out...bot there was only fuel in one of the lines

 

[tom w]

peachy have you tried disconnecting the battery to reset every thing . just a thought ?

 

[Reuvers]

fuel in which lines?

 

[p34ch3y]

peachy have you tried disconnecting the battery to reset every thing . just a thought ?

yea done that no joy

 

[p34ch3y]

fuel in which lines?

there was fuel in the top rail but none in the one underneith that rail

 

[ibizacupra]

check fuel pump relay/fuse..
do you hear it start and prime?

 

[p34ch3y]

check fuel pump relay/fuse..
do you hear it start and prime?

where about is that bill

is it like a huming sort noise for a quick sec

dont surpose you have a pic of where these are and what they do that would be a grat help

 

[p34ch3y]

i have checked all the fuse

are these relays the ones above the fuse back abit,wich one should i be looking at?

 

[Cupra20]

I think i may have a relay if you can find where and which one it is.

 

[p34ch3y]

would the relay forr the fuel pump be the one with 167 on it?

defo cant hear the fuel pump or feel it working

 

[p34ch3y]

is there a inertia switch somewhere??

 

[s1l3nc3r]

relay 167 is the feul pump realy...http://www.seatcupra.net/forums/showthread.php?t=221486&highlight=relay+167

seems he had the same problems as you or similar with a code from the ecu...may be of some help

 

[p34ch3y]

relay 167 is the feul pump realy...http://www.seatcupra.net/forums/showthread.php?t=221486&highlight=relay+167

seems he had the same problems as you or similar with a code from the ecu...may be of some help

yea all the is just what i going on with mine at the mo....god hope i dont need a new ecu

would it hert if i put my mates ecu on of his mk3 ibza cupra to see if it would sort the problem,dun wanna fook his ecu up

 

[RichN]

You won't be able to just swap the ECU's over, you'll need to follow the procedure to re-code them to talk to the immobiliser etc - it can be done but it's not a 3 minute job. You'll then have to swap it back.

 

[p34ch3y]

just got back from ibiza and have tomorow and fri off work and am going to set about trying to get my caR running what should i do first and what of things should i be looking at,

any help on this would realy be very much appreciated as im at a bit of a lose end now