Factory wheel options to clear Akebono Brakes?

[Yeti-AWD]

Hello All,

Just bought a VZ3 estate with the Akebono brakes, It's currently on the "hailstorm" 19s, looking at an alternative set for winter/all saeason tyres.

Just curious if anyone knows what, if any, other Factory/Cupra wheels will clear the Akebono calipers without spacers?

I'd assume the formentor options to clear the same brakes are all 20s

Thanks

 

[Bahnstormer_vRS]

I'd have thought that any of the 19" rims as fitted to the Ateca VZs should fit, as they will clear the Brembo (now Akbono) 372mm brakes on the VZ3.

 

[Yeti-AWD]

I'd have thought that any of the 19" rims as fitted to the Ateca VZs should fit, as they will clear the Brembo (now Akbono) 372mm brakes on the VZ3.

I had been looking at these, but can't find any info whether the Brembo 4 pots and Akebono 6 pots are the same thickness.

With the clearance on the Hailstorms as is, I'm more concerned that the caliper might hit the back of the spokes

 

[Gb330vz3]

Akebono are bigger than the brembos previously. The rims on our vz3 are either 40 or 43 offset.
I’ve just brought a set of Audi q5 rims. They are an et39 offset. They are a 66.6 centre bore but will run a top quality forged spigot ring to take down to 57.1.

 

[Yeti-AWD]

@Gb330vz3 that was the other way i was looking, no issue with running a spigot, just be nice to not need to run another set of bolts for aftermarket wheels.
At least for now.

I think saw a picture of the wheels on another post, have you trial fitted them yet?

I assmume they're also 19s but never sure, VW group seems to flip from copy/paste the same thing in every size, to one-off unicorn fitments.