Fiat Coupe Discs on Brembo's??

[coxyboy]

hi have been looking for uprated grooved discs for my Cupra R but everyone lists 280mm x 22mm for them! no one seems to know there 305mm x 28mm, but have since found that a fiat coupe has 305mm x 28mm 4 stud discs so if i was to buy coupe disc would they be a straight swap??
cheers
coxyboy

 

[m0rk]

A quick look at the 'similar threads' link down the bottom suggests you didn't think "maybe I should have searched first"

 

[coxyboy]

A quick look at the 'similar threads' link down the bottom suggests you didn't think "maybe I should have searched first"

kk thanks

 

[coxyboy]

haver checked all the threads but no answer! no one said any fit for sure!

does any one no of any other cars that have 305mm x 28mm with 4 x 100pcd 57mm bore cause really fancy some brembo max discs! and they only list 280mm x 22mm for Cupra R ??
cheers

 

[WeeJase]

speak to one of the many site sponsors,they will all be able to put a hand on the right ones for the cupra R
i know badger5 will be able to give you an informed answer and a decnt quote no doubt.

 

[coxyboy]

speak to one of the many site sponsors,they will all be able to put a hand on the right ones for the cupra R
i know badger5 will be able to give you an informed answer and a decnt quote no doubt.

have spoke to badger5 but was just seeing what else was around as dont want to be limited to 1 type!

 

[m0rk]

The only brake discs that fit an ICR are ICR brake discs.

Fiat are the wrong PCD, wrong centre bore & I think the wrong offset

 

[coxyboy]

The only brake discs that fit an ICR are ICR brake discs.

Fiat are the wrong PCD, wrong centre bore & I think the wrong offset

k that sorts that then lol
cheers was worth ago! looks like ill prob go for badger5 1's then

 

[ibizacupra]

thats why i make them, as no one caters for ibiza cupra r disks except me, i do eliptically grooved one piece disks and also 2-piece disks for ibiza cupra r's

 

[coxyboy]

thats why i make them, as no one caters for ibiza cupra r disks except me, i do eliptically grooved one piece disks and also 2-piece disks for ibiza cupra r's

have just found these on T-bay:

http://cgi.ebay.co.uk/SEAT-IBIZA-CU...14&_trkparms=72:1301|66:4|65:12|39:1|240:1318

 

[ibizacupra]

good luck with those cheese graters

 

[coxyboy]

good luck with those cheese graters

didnt say i was goin to buy them lol just saying i found some other grooved disks for the R

 

[ibizacupra]

the disks will be std seat ones, grooved (lots)
same as i do but i prefer the quieter less aggressive elipticallyt grooves personally.

 

[M87NER]

Ive got a set of badger5 eliptical grooved discs... carnt fault them one bit!