on mine there is a decal that say "HID not allowed"
mine too hehe, i got xenons though.
lights still to be fitted though.
For people with angel eyes
- Thread starter blackdream
- Start date
mine too hehe, i got xenons though.
lights still to be fitted though.
where does the t-bar led's go? on the headlight? mine are dull as hell lol
and how do you adjust the height of the beam? the drivers side is really low, yet the passenger side is high?
and how do you adjust the height of the beam? the drivers side is really low, yet the passenger side is high?
got more chance of melting em with standard bulbs than hid's to be honest, probably a warning more to do with deflection in reality
would have thought the projector lens it seems to have would cut the beam off ok though ?
would have thought the projector lens it seems to have would cut the beam off ok though ?
no i wasn't talking about HID's i was talking about the led for the angel rings lol
i found some real good info on that pdf file (i didn't read it properly last time)
http://www.geckoshack.co.uk/Lighting_Fitment_Guide.pdf
i found some real good info on that pdf file (i didn't read it properly last time)
http://www.geckoshack.co.uk/Lighting_Fitment_Guide.pdf
Last edited:
how did me n my droopers get dragged into this?
flapper,are your angels all good with full vis then,comparable to the standards?? i'm going back,mine are a liabilty esp with my brake issues as well can't see an object and can't stop sharp when i eventually do,hehe!!
not got the angel eyes - morrette's twin conversion instead which have a phenomenaly clean cut off to the lenses for sure
just you mentioned a lens fault from the heat of the hid's, to be honest i have found the beams a hell of a lot cooler than standard halogen
having 4 to adjust is a nightmare and covered em all up with strips of tape bit by bit, the standard halogen one's were melting the covers off in seconds
got there in the end though
try a cloth over the front of low+high beam for 10 sec then you'll see what i mean
just you mentioned a lens fault from the heat of the hid's, to be honest i have found the beams a hell of a lot cooler than standard halogen
having 4 to adjust is a nightmare and covered em all up with strips of tape bit by bit, the standard halogen one's were melting the covers off in seconds
got there in the end though
try a cloth over the front of low+high beam for 10 sec then you'll see what i mean
thought you had morettes!! sounds like they are the way to a different look wothout the compromise of no vision i can't wait to get these angels off,have someone on here who wants to swap but am gonna pm him and say he's really best off keeping the standards as i don't think i could knowingly put him at risk tbh knowing how bad they are! if he still wants them,it's his call but......
i can't wait to get these angels off,have someone on here who wants to swap but am gonna pm him and say he's really best off keeping the standards as i don't think i could knowingly put him at risk tbh knowing how bad they are! if he still wants them,it's his call but......Similar threads
