g/s stg 1 revo?

[ibizacupra]

Its a stock engine it sould be something about 120g/s i think or am i wrong? I have a MAF from a leon 20VT 132KW is it the same or??? can i put this maf on my car??

nope
wrong sensor
must be for narrowband ecu ibiza

 

[Herr.Barbi]

It's raining here so i could do a log but i ve removed my MAF to clean it. it was totally dirty will se tomorrow did the clean up helped or not :S and if the wetter be OK i do a log....

 

[CupraSean]

Is there any guides anywhere on how to do these logs ? i take it this is using VAGCOM ?? would like to check out mine, just unsure how to go about it.

cheers

 

[Big_daddy]

http://www.ross-tech.com/vcds-lite/manual/datalogging.html

 

[CupraSean]

cheers pal

 

[CupraSean]

out of interest is there a list or guide anywhere as to what are the ideal readings for a standard mk3 ibiza cupra are ? ive done a search but couldnt find anything.

Cheers

 

[Big_daddy]

Post your logs and were tell ya

 

[CupraSean]

top man ! ill get out at lunch and have a blast around see what i can gather ! cheers pal

 

[CupraSean]

as far as blocks to be measuring, should i be looking at 002, 003 and 115 ??

 

[Big_daddy]

two at a time.max
002
118
115
020

 

[CupraSean]

ive found an excel sheet in the VagCom Section... So for each of those measuring blocks i will get readings for:

002 - idle speed, engine load, injection timing, air mass injection
118 - engine speed, intake air temp, boost duty cycle, actual boost
115 - engine speed, engine load, spec. boost, actual boost
020 - timing retard 1, timing retard 2, timing retard 3, timing retard 4


?? does this sound right, sorry for all the Q's complete noob at this. I noticed you live in brum, be good to meet up one day

Sean

 

[Big_daddy]

yes itwould records all them values in table sheet from moment you press start and stop,

Thats fine, Sean drop me a PM

 

[PhilW]

I would do 020 with something like 003 as 020 does not have rpm.

 

[CupraSean]

i went out at lunch and could for the life of me find out to get to the measuring blocks screen, started a test of some sort that took forever and didnt get time to finish before work started agian !!! will have to have a better look tonight !!

 

[Big_daddy]

i went out at lunch and could for the life of me find out to get to the measuring blocks screen, started a test of some sort that took forever and didnt get time to finish before work started agian !!! will have to have a better look tonight !!

Been there ......

 

[CupraSean]

ok finally got it working

Standard cupra, with Induction Kit, Exhaust with Decat, N249 bypass...


This look ok ?

 

[seatcupramad23]

g/s reading looks heatly 137=171bhp boost peaks at 0.6 bar/8-9psi but only seems to really come on boost at 2500 rpm, what gear did you do the run in ?

 

[James.Judd.1]

did you log in 1st gear? with the traction control on?

 

[Herr.Barbi]

whay can i post on the forum it says i have to have 15 post befor i can do a new post or a replay post ??????? can anyone help sorry for the off!!!

I did a log and cant post it :S.... ((

cheers

 

[CupraSean]

yeah did the log in 1st gear, and you may well be right i think i may have logged before turning off traction? how will this affect it . 171 bhp i guess that seems about right for the mods done. is it better to do the run in a higher gear and let it come right through the rev range with traction off. does this seem a little late for boost to be kicking in, could this be an issue with the N75 valve ?