Hmm... are you using H4 bulbs then or did you get them changed? Didn't think they would sit in securely?
pretty sure he's using the H7s m8!
My HID's have finally arrived, and I am very happy with the service. I put the wrong order in i ordered H4 instead of H7 short. Ok yes so there is a bit of difference there! lol. Anyways me and my dad have really struggled fitting them. Firstly I attacked the side lights, dropped the dust cover and it's now found it's way down right into the hole (drivers side) near the intercooler...silly billy! They've been fitted tho took me about half hour to do both sides. However, fitting the HID's is another story. What a job it is. Started the passenger side, as looked easiest for access. Its taken us both approx 2.5hrs to do the passenger side figgering out what goes where, what was best to do first etc, then it looked like we'd busted the black wiring, luckily it's only the insulation bit thats ripped! Switched ignition on to test after fitting was completed and secured, didn't work. Switched engine on, bulb still didn't work. So dad came up with an idea, "try swopping the two red spade connectors. " This mean't taking the dust cover off the back of the bulb again...nightmare! Swopped them round, and finally the bulb switched on absolutely made up that it works. Doing the drivers side one tomorrow. Nearly gave up half way into it, dad was getting really aggreviated and stressed out, don't blame him. I was there really to stop temper fraying lol.
Sorry to hear you're having a tough time m8! I can see where you're coming from. In theory it's a piece of cake...but depending on the length of the wires etc, it is a pig getting the dust cover's back on and fitting the bulbs at the same time!
Although as i'm sure you'll agree, it's worth the effort!
Good luck with the other side m8!
Get some pics up too!