Hub torque settings.

[conkerman]

Hi all had a quick search but no joy.

Got my wheel bearing in and the hub is on my PD100.

I'm looking for the Torque settings for the following.

Driveshaft nut. 36mm with tabs. I have a new one of these.

Strut clamp bolt/nut.

Ball joint bracket bolts.

Track rod end nuts.

Caliper bolts.

That should do it

Cheers in advance.

Cheers
Conks

 

[joop200789]

front hub 50nm.

Strut clamp bolt/nut.

Ball joint bracket bolts.

Track rod end nuts. 20nm then 90 degrees

Caliper bolts. caliper carrier to hub 28nm

cant find the other two on autodata

 

[RUM4MO]

front hub 50nm.

Strut clamp bolt/nut. (60nm then 90 degrees)

Ball joint bracket bolts. (20nm then 90 degrees)

Track rod end nuts. 20nm then 90 degrees

Caliper bolts. caliper carrier to hub 28nm

cant find the other two on autodata

I've added in the missing values (from Haynes Polo 9N manual).

 

[conkerman]

Thank you very, very much.

Thats awesome, Just getting the other hub off and am having grief with the ABS sensor of all things

Nothing a few hours of WD40 won't fit.

Once again. Thanks. You're a diamond

Conks