Ibiza Button Panel Relocation Wire

I4MJ05H

Active Member
Nov 9, 2016
23
0
Hi Everyone,

I have purchased a new panel to relocate my Hazard Lights, ESP and Passenger Airbag Indicator however I am struggling to find a wiring harness which works correctly.

I have purchased:
ZENEC Z-EACC-S6J - Tyre Pressure button does not work
ZENEC Z-EACC-S6JN - Tyre Pressure and ESP buttons do not work

Does anyone know of a replacement which will allow all of the buttons to work? I have Lock, Unlock, Heated rear window, Hazards, ESP and Tyre Pressure as well as the Passenger Airbag Warning Indicator Light. (The new panel part number is 6J0927137R).

I am returning the ZENEC Z-EACC-S6JN, however I am being forced to keep the ZENEC Z-EACC-S6J because (although tyre pressure does not work), I won't have hazards or ESP functionality if I return it too.

Otherwise, does anyone know the pinout of the panels so that I can relocate / add wires to the correct place from the original connector to the new connector?

Thanks!
 

JakeGwilliam

Active Member
Dec 16, 2012
18
2
I did have a similar issue Josh. I managed to find the pin outs for the new hazard switch panel and extend the wires from the ESP buttons, etc down to the hazard panel. Lemme know if you need help.
 
May 14, 2019
7
1
Yorkshire
Hi Jake,

I have the xtrons android stereo put in and also the button panel changed, looks like I don't have the wiring though for the hazard light and other buttons. Been driving without hazard lights for a while now. I want this changed also the airbag light has come on the dash. What would you recommend?
 

JakeGwilliam

Active Member
Dec 16, 2012
18
2
Hi Jake,

I have the xtrons android stereo put in and also the button panel changed, looks like I don't have the wiring though for the hazard light and other buttons. Been driving without hazard lights for a while now. I want this changed also the airbag light has come on the dash. What would you recommend?

Hey Ray. Sorry for the long delay in replying. So you have the upgraded set of buttons without the loom? If you're feeling confident you can repin the wires down to the new set of buttons and you won't have to worry about the loom. I do have an internal document from SEAT detailing the pinout for the hazard switch and what wire needs to go where.
 
Aug 15, 2019
1
0
Hey Ray. Sorry for the long delay in replying. So you have the upgraded set of buttons without the loom? If you're feeling confident you can repin the wires down to the new set of buttons and you won't have to worry about the loom. I do have an internal document from SEAT detailing the pinout for the hazard switch and what wire needs to go where.

Hello Jake,
I recently also bought an android radio for my Ibiza FR, and the relocation switch panel, but didn't buy the cables. Now I'm looking for the document from seat that has the pinout details explained. Could you please send it here, or email me ([email protected]).
Thanks in advance
 
Jan 14, 2019
1
0
Hey Ray. Sorry for the long delay in replying. So you have the upgraded set of buttons without the loom? If you're feeling confident you can repin the wires down to the new set of buttons and you won't have to worry about the loom. I do have an internal document from SEAT detailing the pinout for the hazard switch and what wire needs to go where.
Hi there, if possible could you send me the wiring diagram so I can repin the looms?
Please send to [email protected]
Thanks!
 
Jul 12, 2019
8
1
Hi can someone send me the wiring diagram/pin outs so I can make a Loom for this.
Thanks
Sam
 
Nov 6, 2021
2
0
Hi guys, I am somewhat new to the Ibiza life and I am attempting to relocate my buttons now, could someone send me a diagram for the pinouts? I am attempting to make my own loom and potentially my own circut board for the buttons so I don't have any unused or incorrect buttons on the panel, I currently have: lock, unlock, heated rear window, auto start/stop, tyre pressure. I need to move hazard, passenger airbag, and ESP to the panel but none of the panels I have found online have the right buttons for this. I have considered buying a full panel and just repurposing the heated seats buttons, but then I would have one button that doesnt do anything and a few of the symbols would be wrong.
 

Teknalogique

Active Member
Jan 26, 2020
32
7
Hi guys, I am somewhat new to the Ibiza life and I am attempting to relocate my buttons now, could someone send me a diagram for the pinouts? I am attempting to make my own loom and potentially my own circut board for the buttons so I don't have any unused or incorrect buttons on the panel, I currently have: lock, unlock, heated rear window, auto start/stop, tyre pressure. I need to move hazard, passenger airbag, and ESP to the panel but none of the panels I have found online have the right buttons for this. I have considered buying a full panel and just repurposing the heated seats buttons, but then I would have one button that doesnt do anything and a few of the symbols would be wrong.

I've updated the link in my previous post and it's now working - hopefully this should cover everything you need.
 
Progressive Parts, performance parts and tuning specialists