Internals for Big turbo

[ibizacupra]

Raceware studs are reuseable if you plan to be taking things apart often then they pay for themselves. I'll be running OEM stretch bolts. I've not heard of heads lifting with them even on high power. Always ready to be prooved wrong though if anyone else has btter info.

JBS's Octavia lifted its head stretching its OE headbolts.
peace of mind for me.

 

[HTC]

Thanks for the info. What sort of power was it running at the time?

 

[ibizacupra]

big boost....>600bhp.... approx....

 

[beattie17]

Where can i get Raceware studs and how much are they?

 

[The MoffMeister]

034 motorsport

qed power

 

[INA]

Hold tight, I will be releasing ARP head bolts VERY Soon....these will only be available through myself or 034 Motorsport as we both made the investments to make this happen.

 

[ibizacupra]

price of these vs Raceware?

 

[INA]

about 1/5 the price.I dont even sell racewares anymore because of the price....
I sell ARP main studs and stock head bolts these days.For $500US you can buy 13 sets of stock head bolts.if you think you will EVER lift your head 13 times then go with the race wares.

 

[ibizacupra]

I'm interested in the ARP's Issam. and mains for my new motor build.

 

[INA]

http://www.seatcupra.net/forums/showthread.php?t=181992

 

[HTC]

Well I've just bought this lot.

Intergrated Engineering 20mm rods
Supertech valve set.
SuperTech valve spring set including titanium retainers.
Supertech Valve Guides (just in case mine are out of spec)
Oil pump
Headbolts
Head Gasket Set
New piston rings
Rod Bearings
Injectors 630cc Siemens (AGU/AEB fitment)
Walbro fuel pump.

Sticking with the standard bore size with mine now.

 

[ryan_s3]

just rods and valves then mate.chosen a turbo yet?

 

[HTC]

It's a toss up between these.

FP 18G
Blouch TD05H-18G
Also seen this one too

What do you think Ryan?

 

[ryan_s3]

The scoobyclinic one is a blouch turbo and is running a td06 compressor cover so may not fit or may be very very tight.
FP should be pretty good and i think has a smaller compressor cover,here is a uk distributor (so are Turbo Dynamics-more reliable?)
http://www.scoobymania.com/shop/pro...d=670&osCsid=c7be573b4a9837feab2027be754b5e92

 

[Cupra20]

Well I've just bought this lot.

Intergrated Engineering 20mm rods
Supertech valve set.
SuperTech valve spring set including titanium retainers.
Supertech Valve Guides (just in case mine are out of spec)
Oil pump
Headbolts
Head Gasket Set
New piston rings
Rod Bearings
Injectors 630cc Siemens (AGU/AEB fitment)
Walbro fuel pump.

Sticking with the standard bore size with mine now.

where did you get it all from as vagworx haven't got back to me yet about a price and how much did it cost if you don't mind me asking?

 

[HTC]

Everything is from qedpower.com. £1185 posted. No idea how much I'll get stung with taxes tho.

Ryan, thanks for the info. I had noticed that the FP compressor housing looked smaller. I am leaning towards this one the most.

 

[Cupra20]

cool cheers mate, i think i'll e-mail them and see how much it's going to be, did it take long for delivery?

 

[HTC]

Only ordered it today. Bob will be posting it out tomorrow. Estimate for delivery is 1 week.

Ryan, just spotted this one.......know anything about it? --> CLICKY

 

[ryan_s3]

Never heard of Jam,could be a cheap chinese copy!
Stick with FP or Blouch/Scoobyclinic(if it fits!)

 

[Cupra20]

ah i see , a week ain't to bad from the states.