Jetex Cone Filters :)

[PhilW]

Yeah i trimmed mine.

 

[AJ©]

Right, Complete NooB lol, just reading through the thread and sorting out all the stuff i will need and have come up with this:

And where can i get the circled pipe?

 

[djscorch]

That's a forge TIP (turbo intake pipe) mate. Available from forge, although you don't need one to do this induction mod.

 

[AJ©]

Cheers fella had a quick look on there site and found this:

http://www.forgemotorsport.co.uk/content.asp?inc=product&cat=190101&product=FMIBIND

so the above 3 items are all i need and this forge TIP is a fancy optional extra or does it help BHP?

 

[djscorch]

No it is a reasonable performance mod - bit of a bitch to fit by all accounts though!

 

[__B3NNY__]

did anyone have to trim the 45 degree bend as mine seems abit longer than the pics ?

Bit of trimming done here too.

 

[Robbie C]

OK, after waiting 3 weeks I finally got my Jetex filter from Euro Performance today so I now have the following to fit on the weekend:

Forge TIP, joiner elbow, Jetex filter, breather filter for SAI.

For those reading through this thread and wondering where to source all the parts from, I'd recommend the following:

1. Forge TIP from http://www.forgemotorsport.co.uk/content.asp?inc=product&cat=190101&product=FMIBIND

2. Joiner elbow from http://cgi.ebay.co.uk/SILICON-HOSE-...eZWD1VQQtrksidZp1638.m118.l1247QQcmdZViewItem

NB - This seller is selling genuine Forge parts cheaper than the website. The item comes with a postage label from Forge and with a Forge product code on.

3. Alloy hose joiner from http://cgi.ebay.co.uk/ALLOY-JOINERS...eZWD1VQQtrksidZp1638.m118.l1247QQcmdZViewItem

Again, this is a genuine Forge part for less money than direct from the site.

4. Jetex filter from http://www.europerformance.co.uk/pages/products/product_info.mhtml?id=340460

Be prepared for a long wait on this item though (unless they've recently stocked up on these)

5. 28mm Breather filter for SAI pipe from http://cgi.ebay.com/ebaymotors/Hond...hash=item370019478670&_trksid=p3286.m20.l1116

This took less than a week to arrive from Taiwan

Additionally, you may also want a few jubilee clips which can also be bought on ebay or from Forge if you're after high quality ones.

Hope this helps

Rob

 

[AJ©]

Robbie thanks very much!! thats the kind of answer i was looking for!!

 

[JIMYU]

2. Joiner elbow from http://cgi.ebay.co.uk/SILICON-HOSE-...eZWD1VQQtrksidZp1638.m118.l1247QQcmdZViewItem

NB - This seller is selling genuine Forge parts cheaper than the website. The item comes with a postage label from Forge and with a Forge product code on.

I emailed this seller about his silicon hose, but didn't go for it as its only 125mm long. The one from forge is much bigger..

 

[jonesya3]

I emailed this seller about his silicon hose, but didn't go for it as its only 125mm long. The one from forge is much bigger..

recieved that filter this morning jimmy thanks very much

just got to fit it now

 

[pj1985]

OK, after waiting 3 weeks I finally got my Jetex filter from Euro Performance today so I now have the following to fit on the weekend:

Forge TIP, joiner elbow, Jetex filter, breather filter for SAI.

For those reading through this thread and wondering where to source all the parts from, I'd recommend the following:

1. Forge TIP from http://www.forgemotorsport.co.uk/content.asp?inc=product&cat=190101&product=FMIBIND

2. Joiner elbow from http://cgi.ebay.co.uk/SILICON-HOSE-...eZWD1VQQtrksidZp1638.m118.l1247QQcmdZViewItem

NB - This seller is selling genuine Forge parts cheaper than the website. The item comes with a postage label from Forge and with a Forge product code on.

3. Alloy hose joiner from http://cgi.ebay.co.uk/ALLOY-JOINERS...eZWD1VQQtrksidZp1638.m118.l1247QQcmdZViewItem

Again, this is a genuine Forge part for less money than direct from the site.

4. Jetex filter from http://www.europerformance.co.uk/pages/products/product_info.mhtml?id=340460

Be prepared for a long wait on this item though (unless they've recently stocked up on these)

5. 28mm Breather filter for SAI pipe from http://cgi.ebay.com/ebaymotors/Hond...hash=item370019478670&_trksid=p3286.m20.l1116

This took less than a week to arrive from Taiwan

Additionally, you may also want a few jubilee clips which can also be bought on ebay or from Forge if you're after high quality ones.

Hope this helps

Rob

If you are fitting yourself and dont have a workshop to do it in before and after pics of how much skin you have on your knuckles would be interesting!

 

[PhilW]

I wouldnt bother wasting your money on a breather filter either.

 

[nogutsnoglory]

I wouldnt bother wasting your money on a breather filter either.

Why not?
Surely you need something to connect to that pipe?
how have you got yours

 

[PhilW]

Why? It just blows warm air, thats it.

I dont have SAI on my car at all.

 

[nogutsnoglory]

Have ordered one of those 28mm breathers, will have to wait until it arrives before i fit the rest as dont want it floating around in the bay without one on, even thought the rest has now arrived

 

[JIMYU]

you could nick a pair of your Mrs' tights and elastic band a piece on the end lol

 

[nogutsnoglory]

 

[nogutsnoglory]

What cai are people using for this? Ive got silver flexi hose but im pretty sure its attached to my airbox so wondering how it will attach with a cone there instead

 

[David_smith_909]

sounds quite throaty, DV isnt as loud as i thought it would be.
Is that carls ibiza on the right of the vid

my car when it was blue @Trax (cam phone)

http://myspacetv.com/index.cfm?fuseaction=vids.individual&videoid=18912320

 

[darren200]

am running a bsm carbon dynamics airbox it sounds da nuts