ko4 actuator help please

[mark_20vt]

i need to know the standard setting on a k04 actuator as mine has been adjusted on the bam engine i recently bought. if someone could take a quick pic of theirs or even just count the threads protruding that would be great.

cheers

 

[mark_20vt]

anyone???

 

[Mitchy]

Should be 17mm to the end of rod from the side of the slider.

 

[Skorchio]

What do these do?

 

[Mitchy]

Puts tension on your wastegate flapper valve.

 

[mark_20vt]

Should be 17mm to the end of rod from the side of the slider.

cheers, better go find a steel rule and spanner...

 

[Mitchy]

2 10mm spanners also

Its from the side of the nut as you look down on it, not the slider as i said above.

 

[mark_20vt]

i know the pic is of a k03 but is it the top dimension or bottom one that should measure 17mm?

 

[Skorchio]

Cool thanks

 

[mark_20vt]

???

 

[Mitchy]

Bottom dimension 17mm

 

[mark_20vt]

cheers fella

 

[ScottHmk4]

How easy is this to adjust?

 

[vroomtshh]

How easy is this to adjust?

Piece of piss

 

[ScottHmk4]

Piece of piss

We can get that too then lol