lcr rear arb

[kennyrodgers84]

was just lookin at awesomes site for a rear arb for my 2005 lcr.which one suits my car as it doesnt say on the site.here is the link.......http://www.awesome-gti.co.uk/store/section.php?xSec=355 cheers

 

[Ruddmeister]

was just lookin at awesomes site for a rear arb for my 2005 lcr.which one suits my car as it doesnt say on the site.here is the link.......http://www.awesome-gti.co.uk/store/section.php?xSec=355 cheers

Further to my reply in your other thread it's Golf Mk4 Fitment
25mm
28mm
and IIRC
32mm

http://www.seatcupra.net/forums/showthread.php?p=1222338#post1222338

 

[kennyrodgers84]

Further to my reply in your other thread it's Golf Mk4 Fitment
25mm
28mm
and IIRC
32mm

http://www.seatcupra.net/forums/showthread.php?p=1222338#post1222338

thanks again,tell me this is the rear arb handy fitted??

 

[Ruddmeister]

thanks again,tell me this is the rear arb handy fitted??

If you follow that link I have a picture of one fitted, fairly easy with decent ramps I'd say.

Don't be shy about beefing up the front ARB it won't cause understeer (even in the wet) TBH I would do Front and rear together if you can

 

[p1tse]

if you just upgrade the rear only go for the golf mk4 v5 rear arb.

probably best with front and rear i.e. neuspeed or r32 ones

 

[Si]

So do the front and rear r32 ones fit?

Just had an MOT and they have picked up on the front ARB as it's creaking.

 

[Ruddmeister]

So do the front and rear r32 ones fit?

Just had an MOT and they have picked up on the front ARB as it's creaking.

Front should fit the LCR, in theory not tried AFAIK.

Rear could be made to work assume you would need to make/find some drop links etc.

I thought about the R32 one but it's not much of an increse in diameter AFAIK, I used the 25mm Neuspeed and was impressed.

 

[AwesomeSarah]

Hi Mate
We sell LOTS of the Neuspeed ARB`s
Neuspeed Rear Anti Roll Bar 25mm SU-ARB-NEU-GO4C £185
Neuspeed Rear Anti Roll Bar 28mm SU-ARB-NEU-GO4A £195
There is the race one too at £245.00 + VAT too
I have checked and we have one of each in stock , but they do sell quickly
Sarah

 

[Rikko]

Currently i have a boggo std LCR (not for much longer ) but am just wondering what size arb is best and would i need to change them when i fit my KW V3s or keep them the same. Also are Seat dealers willing enough to fit a S3 strut brace as there is drilling involved.
Cheers Rikko

 

[UncleFester]

GwentVW are doing full eibach kits 25mm front and rear for just under £250 delivered - modified front to clear drive shafts.

 

[NeilC]

Currently i have a boggo std LCR (not for much longer ) but am just wondering what size arb is best and would i need to change them when i fit my KW V3s or keep them the same. Also are Seat dealers willing enough to fit a S3 strut brace as there is drilling involved.
Cheers Rikko

I'll have front and rear arbs, a strut brace and some v3's for sale come saturday if you want to save a few bob

I'd do the brace myself (in fact - I did!) but i think i'd rather go to a specialist than pay dealer rates for an easy job.

 

[Rikko]

How come you selling up getting a new motor how did you get on with you V3s mate and how much you asking for the lot also indevidual (cant spell) plus how old are they.
Rikko

 

[NeilC]

How come you selling up getting a new motor how did you get on with you V3s mate and how much you asking for the lot also indevidual (cant spell) plus how old are they.
Rikko

I realized i hadn't put anything in the boot for over a year, and i never have more than 1 passenger so i've chopped it for an exige.

I think i put them on about 6 months ago (they took months to turn up! ) and have done about 6k on them. Arbs a bit longer but i'll look at my reciepts book to check. I haven't really thought of a price yet as i will need to check the condition of them when i take them off to make sure they are A1. 2nd hand = half price in my book. I'll pm you in the next few days if thats ok. I need to get a move on as my new cars arriving on a trailer 9am sat

I've found them fine with no probs at all. They let you get away with being quite stiff if you like that as they are really well damped. But being the v3's you can set em how you like.

I also have a load of other stuff to make your trip worthwile

 

[Rikko]

Ye not sounding like a cheap skate but 2nd= half price to me aswell . So what other stuff you sellin mate. You wont be disapointed with the lotus mate am currently doing a full refurb on a 71 Elan +2 little bit older than the Exige but still a lotus and its phonominal mate so enjoy. Ye PM me anytime you want mate.
Rikko

 

[Si]

What ARB are they NeilC?

 

[Ruddmeister]

Currently i have a boggo std LCR (not for much longer ) but am just wondering what size arb is best and would i need to change them when i fit my KW V3s or keep them the same

Them? you only currently have 1 on the front, rear is a torsion bar type arrangement rather than traditional ARB

Sizes etc is covered on the sticky at the top of the Leon MK1 section

http://www.seatcupra.net/forums/showthread.php?t=91243

 

[Rikko]

Thanks for that bit of advice Rudd but like i said before i keep forgetting the search tag is there

 

[NeilC]

What ARB are they NeilC?

28R 25F. If you wanted to diy i'd get a 25R only as the front's a pain if you dont have a 2 poster, although IIRC rudd how no probs, so it may just be me!