leon cupra r splitter
- Thread starter carlisle pete
- Start date
links to a few:
http://www.seatcupra.net/forums/showthread.php?t=81172&highlight=blue+cupra+snow
http://www.seatcupra.net/forums/search.php?searchid=1569369
but check out the ibiza's in the seat pictures for more mate, Beaker has some of Olly's car.
http://www.seatcupra.net/forums/showthread.php?t=81172&highlight=blue+cupra+snow
http://www.seatcupra.net/forums/search.php?searchid=1569369
but check out the ibiza's in the seat pictures for more mate, Beaker has some of Olly's car.
cheers mate jus coz iv got one comin tomoz for mine! along with FMIC il post pics up wen its all on
Do it mate, if your taking the bumper off to fit the FMIC, use that opportunity to fit the splitter then, so it makes it easier for you to line the splitter up.
few of mine
Really good mod and very cheap and easy to do. With the bumper off it'll be even easier.
Really good mod and very cheap and easy to do. With the bumper off it'll be even easier.
Take the bumper off and turn it upside down. After trimming the two long location spigots (used on Leon) off the splitter, lay it on the bumper where you want it. Now secure it with G-clamps.
Now start in the middle at the front and drill a hole, secure splitter with a nut (nylock) and bolt. Now work your way out doing the same, positioning and tweaking the position of the spiltter as you go.
When fitted you will see that the splitter is about 40mm too long each side in sticks out into the wheel arches. Trim it down with a sharp hacksaw. Refit bumper. Job done.
Bumper removal guide HERE
Now start in the middle at the front and drill a hole, secure splitter with a nut (nylock) and bolt. Now work your way out doing the same, positioning and tweaking the position of the spiltter as you go.
When fitted you will see that the splitter is about 40mm too long each side in sticks out into the wheel arches. Trim it down with a sharp hacksaw. Refit bumper. Job done.
Bumper removal guide HERE
just jacked the car up....pre drilled holes in the splitter then screwed a few self tappers in to the bumper...job done...took 15 minutes..of which atleast 5 was jacking the car up
the splitters all on! with modded front bumper! all smoothed etc! looks the nuts! FMIC is comin tuesday so will hav pics weds all goin to plan! oh also put a silver metal flake on the honey comb grill! looks awesome!
Similar threads
