Leon Mk2 OBD Socket

[BarryHills]

Anyone know where the OBD socket is on the Mk2 Leon?

 

[Igor23]

Beneath the main light switch, panel pulls off, plug and play....

 

[BarryHills]

Cheers for that, Id been worndering where it was for a while.

 

[AndyCon]

Ok so before I break this panel is there any where I should push or pull
Tried for 5min tis afternoon and did not want to force too much
I assume we are looking at the section of trim below the lights switch?

 

[alx_chung]

Ok so before I break this panel is there any where I should push or pull
Tried for 5min tis afternoon and did not want to force too much
I assume we are looking at the section of trim below the lights switch?

Its pull and yep its the trim that is below the light switch just about where right knee would be if you are in a RHD car.
Alex

 

[DanGB]

Ram a screwdriver in either the top or bottom, cant remember! Mines been left off for a few years lol

 

[alx_chung]

Ram a screwdriver in either the top or bottom, cant remember! Mines been left off for a few years lol

Or if you have nails just dig them in. I find it easier to open it if I start at the side.
Alex

 

[robdf2]

Ram a screwdriver in either the top or bottom, cant remember! Mines been left off for a few years lol

no , should be gap on right end to get ur fingers under.

also look out for the clips they ping off !

 

[AndyCon]

Thanks folks
Getting fingers in the bottom and pulling worked

 

[Craige7995]

Which budget fault reader should I buy for my 2007 cupra? Thanks

 

[Legojon]

Which budget fault reader should I buy for my 2007 cupra? Thanks

Hi, this thread is 11 years old. So you would have been better making a new one. Probably the better option on a budget is to get OBD11 or Carista.

 

[Craige7995]

Hi, this thread is 11 years old. So you would have been better making a new one. Probably the better option on a budget is to get OBD11 or Carista.

I've just ordered an ancel. Thanks for your reply