Mk2 Leon Part numbers/Pictures

[KebabWarrior81]

Could anyone do this for the mk1 cupra r? Would be great help

I'll set one up and maintain it if people could forward me anything they wish to add or they can add themselves like on this thread. It's not a problem : )

 

[Sam_Thulborn]

I know a couple of part numbers

 

[KebabWarrior81]

Bluetooth Module 5P0862335B

Part number and images kindley supplied by Daniel-M

 

[richicupra]

Intercooler charge pipe O-ring/seal for plastic-ended IC, as these can often cause a boost leak or leak oil onto the undertray. Part numbers are for the latest green O-rings.

Seal A (one located at each end of the IC): 3C0145117H, corresponding metal retaining clip is 1J0145769H

Seal B (slightly smaller and located at the turbo end of the boost pipe on the IC inlet): 3C0145117F, corresponding metal retaining clip is 1J0145769B


To replace the full set, you need two of seal A and one seal B. I would recommend replacing the metal clips too as they can bend out of shape easily and are less than a pound each.

 

[Big Lee M]

Dipstick, part number 06F-115-611-F about £7 from Dave at SERE

 

[KebabWarrior81]

oil filter with seal ring (06D115562

Sump plug with washer (N90813202

 

[KebabWarrior81]

My Clutch set up

LUK DMF (415033110)
LUK Release Bearing (510017710)
Helix uprated clutch cover (603316)
Helix uprated organic clutch plate (713317)

 

[KebabWarrior81]

Highly recommended oil for mapped Cupra's.

 

[Daniel M]

Gearbox mount.

Is for an FR PD170, however I imagine they'll be similar across the range.

Part number - 1K0199555T



Its the one at the bottom

Price is £54.41

VAT is £10.88

Total price - £65.29

I bought mine from TPS

 

[AlexK1]

TFSI Fuel vapour purge valve (p0441 fault code)

06E 906 517 A - I paid £21.17 plus vat

TFSI fuel injector repair kit (when removing inlet manifold)

06D 998 907 A - I paid £38.16 plus vat for 4 of these


Sent from my iPhone using Tapatalk