mk3 ibiza cupra 'estate' 20vt

[h17och]

congrats on the house by the way, you boring git

 

[Damoegan]

also forgot to say that i got the cody coupe aswell so im gonna have a ibiza cupra, vario cupra, and a cordy cupra coupe

cupra museum to follow shortly

Thats just showing off now Hooch

Get some pics up beforw you stat to stripp them

 

[h17och]

got delivered about an hour ago.

had a look over it. good brembos, 5 seatsport wheels. the 4 on the car are scuffed but 5th one is mint. got the wrong airbox on it and dv was loose. guessing he changed them for insurance. also got a upgraded lower tip pipe.

THEN!!!! i noticed it h as a full set of bilstein pss9 fully adjustable coiulovers....£1300 worth!!!!!

wot a deal. got pics will post later

only gutter is the dash airbag has gone off and the only good panel on the fron is the wing and headlight. nothing else i can use

 

[Damoegan]

Blistein's! looks like you have fallen in poo and come out smelling of roses. You lucky man.

 

[h17och]

had a real busy afternoon

got the front end off, not easy as it was all bend up. interior stripped inc dash. got most of the wiring loom off of the engine and interior.

stuck the seats in the vario also

pics when it was delivered

i have the sideskirt. it just popped off when it was coming off of the lorry

HoocH

 

[MIkey kc]

ouch! big hit then.

The paint work is badly faded isnt it lol typical

 

[h17och]

its not been looked after great. never seen an engine bay soo dirty. paint is typical yellow....different shades.

the chassis leg is 's' shaped. what ever he hit, he aimed it well for the strongest part of the car lol. cant imagine if it didnt hit the leg

 

[h17och]

take a look at post #33 in the link

http://www.seatcupra.net/forums/showthread.php?t=80334&page=2

 

[roly]

Im sure i recognise the reg no, this would be going back to it's original owner from new/near new

Another yellow one aswell, gotta be something to do with the drivers

If you get stuck for a dash i do have a spare one but it's got holes cut in it where my cage goes through

 

[h17och]

ok, thanks mate. ill bear it in mind.

you got pics? i may patch it up and get it flocked

 

[roly]

It's in the garage roof so i'll try and dig it out this weekend and get some

 

[h17och]

thanks

 

[roly]

I've got a wing aswell, can't remember what side it is but it's brand new and stashed away somewhere so will look for that at the same time

 

[h17och]

good lad

also wanted to ask you if you changed the firewall in your ibiza to the mk3 one?
if not do you run hydralic clutch and how?

HoocH

 

[h17och]

just see in 1st page of your thread. you have a pic of holes for clutch master cylinder. you cut them? or as above, changed bulkhead?

 

[andyj]

IIRC Ben cut holes in the Mk2 firewall

 

[andyj]

looks like it's got a none standard exhaust on it to.... it'll fit the COrdy, but you just won't see the tail pipe...

 

[roly]

I cut out the area on the firewall where the clutch and brake master cylinder were and then used it as a template to mark up and cut through my original one with a cone cutter

Was going to remove the 20vt firewall but the stuff they bond it in with is a pig so thought better of it

 

[joshpmc]

Hooch I am very interested in the brembos and the wheels. PM me a price asap and i will let you know as i get paid tomorrow!!!

 

[h17och]

thanks roly. i will do the same. is that the only difference with bulkheads?

mk3 fans all fit ok?