My double din conversion (TUTORIAL)

[x24sevenbikerx]

http://www.caraudiodirect.co.uk/con-ct23vw03a-ct23vw03a-double-din-facia-plate-for-volkswagen.html

can anyone confirm the above is the right cage / stuff needed??

will i also need a new iso adapter harness thing?

 

[aaronipswich]

Well this is the one some people have used

- Double din headunit
- Double din cage from Autoleads (part no: DFPK-113.)
- Single din center console
- Double din facia from SEAT (part no: S1M0863263F40N. This was the number for my car, it may be different in yours as they come in 3 colours)

 

[x24sevenbikerx]

yeh that one is for any car , and in the thread someone said that the one for the golf mk4 is better , was just wanting to make sure this was the kit they were meaning.

 

[aaronipswich]

When I done mine I used the standard pioneer one and it does poke out a little bit
I'd love to be able to tuck it back in a bit

 

[x24sevenbikerx]

yeh i would have used one that came with my doubledin but its a second hand unit so didnt come with one

 

[aaronipswich]

Oh I c
What double din have you got to go in

 

[x24sevenbikerx]

Clarion NX501E

also needs a GPS antenna thing....

 

[aaronipswich]

Found this for you but no part numbers on it

http://www.clarion.com/gb/en/MungoBlobs/555/262/NX501E_NZ501E_EN,1.pdf

And if you use a different cage will the surround fit ??

 

[aaronipswich]

This could be the gps aerial


Item #: 200640164924

 

[x24sevenbikerx]

Found this for you but no part numbers on it

http://www.clarion.com/gb/en/MungoBlobs/555/262/NX501E_NZ501E_EN,1.pdf

And if you use a different cage will the surround fit ??

hehe was just looking at that , im not sure ... bad thing about buying 2nd hand stuff that dosnt cmoe with whats needed! , ive ordered that golf mk4 cage kit if it dosnt fit then o well... might just try get something custom made to house the headunit in

 

[monk3y303]

Hi bringing up olf thread but how much did this all cost u.. Ehere is ur ashtray and obd port then?

 

[MrDGOrman]

Hi bringing up olf thread but how much did this all cost u.. Ehere is ur ashtray and obd port then?

Honstly wouldn't be able to tell you how much it cost me to make this. Sorry buddy. I haven't had a Leon in years so can't remember where the ash tray or OBD reader was.

Sorry but I don't think I'm much use now. I basically replicated the original dash layout, or the Center console that came with the double din included which makes the ash tray in the stash pocket area under the heater dials?

Sorry mate

 

[nazamin]

Honstly wouldn't be able to tell you how much it cost me to make this. Sorry buddy. I haven't had a Leon in years so can't remember where the ash tray or OBD reader was.

Sorry but I don't think I'm much use now. I basically replicated the original dash layout, or the Center console that came with the double din included which makes the ash tray in the stash pocket area under the heater dials?

Sorry mate

If u decide u want to make more give us a shout mate I'm after one

 

[monk3y303]

Same.lol

 

[Davegt3]

Sorry to bring up an old thread but don't suppose you still have the pictures of what you did

 

[gregorycbr]

Me too need pictures ?

 

[Alexis27]

The pictures are there. They've just moved to the end of his post.