N249 and N112 Bypass

[s1l3nc3r]

iirc you just block off the vac lines from the SAI reuvers can confirm this...your best bet is to remove the SAI and replace with resistors you will need a blanking plate aswell for the SAI otherwise you can get a fault code every so often from the SAI..

 

[p34ch3y]

iirc you just block off the vac lines from the SAI reuvers can confirm this...your best bet is to remove the SAI and replace with resistors you will need a blanking plate aswell for the SAI otherwise you can get a fault code every so often from the SAI..

spot on

 

[kyle'87]

block them

Ok great, Hopepfully plan to do this soon.

iirc you just block off the vac lines from the SAI reuvers can confirm this...your best bet is to remove the SAI and replace with resistors you will need a blanking plate aswell for the SAI otherwise you can get a fault code every so often from the SAI..

Yeh I am going to remove the SAI, as well at fitting a catch tank. Its on my todo list

 

[Reuvers]

for the catch tank, please take off the inlet. its sooo much easier.

I installed one about a week ago, and took about 30 minutes, taking everything off and putting everything back on.

and yes silencer thats all correct! getting good at this are you...?

 

[s1l3nc3r]

ah well you learn from the best dont you...