Fixed a small oil leak, the hose from the PCV valve didnt seal that well anymore. Replaced both O-rings with new Nitril rings. I will probably buy a new hose somewhere in the future, as they are pretty cheap.
-
Guest, 🎅🎄Looking for a stocking filler idea? Why not treat yourself or a loved one to our high quality CUPRA or SEAT valve caps. Order now from the merchandise store
ND-Photo.nl 's - Seat Leon ST Cupra 280
- Thread starter nd-photo.nl
- Start date
-
- Tags
- cupra dynamic grey estate st280 stage2
I just had to...
This is how the Cupra should have been outfitted from the factory. The diffuser needs to be more outspoken and Rieger Tuning have a perfect solution for that. I bought the Rieger Tuning, as the Maxton diffuser had quite some leadtime and I didn't want to wait any longer.
Kudos to Rieger for their packaging, the diffuser is well protected. Fitment is also very good, and comes with instructions and fitting materials.
Looking impressive allready!
Stock diffuser
You need to drill out these 2 rivets
Took me a lot of time to get it off. Finally I got the hang of it, you need to manhandle it a bit to get it loose. Just look at the difference haha
Deez "Nuts" replace the double rivet setup
This is how the Cupra should have been outfitted from the factory. The diffuser needs to be more outspoken and Rieger Tuning have a perfect solution for that. I bought the Rieger Tuning, as the Maxton diffuser had quite some leadtime and I didn't want to wait any longer.
Kudos to Rieger for their packaging, the diffuser is well protected. Fitment is also very good, and comes with instructions and fitting materials.
Looking impressive allready!
Stock diffuser
You need to drill out these 2 rivets
Took me a lot of time to get it off. Finally I got the hang of it, you need to manhandle it a bit to get it loose. Just look at the difference haha
Deez "Nuts" replace the double rivet setup
Wow! The exhaust tips also look better with this diffuser 
Man i'm liking this car more and more
The effect is even more dramatic in daylight
Man i'm liking this car more and more
The effect is even more dramatic in daylight
Bought this uprated Bartek DSG DQ250 cooler (10 rows > 20 rows), but I had to send it back. I found out later I bought the wrong one. Maybe in the future I will buy the correct version.
I bought this one
This is the one to have for Gen 3:
That 20 row cooler will not fit here ?
I bought this one
This is the one to have for Gen 3:
That 20 row cooler will not fit here ?
Personally I fitted the DSG Aux Radiator with CSF Quadruple Pass DSG Cooler although Airtec do a cheaper version and certainly when I tested it out on the track it made a big difference to DSG Oil Temps.
Not sure if your motor has the second front aux radiator (on uk car left hand side as you face motor) for the engine but I have also fitted that and you can find the part list here https://www.seatcupra.net/forums/th...ed-a-second-aux-radiator.473827/#post-5045687
Sorry was out on a track day all day so not had time to reply.
I will be honest and say I had not come across the fuel cooler before and I would suggest you need to decide what you want from your car. Mine is very much track focused so the second cooler was a) cheaper than replacing the main rad and b) it came as standard kit on the Golf R.
Cant see any benefit with regards to temps but its an insurance policy.
From what I have read about the fuel cooler I cant see a need for me to have one and certainly I am not sure you are going to get a huge benefit from it on a road car, however as I said its not a bit of kit I have seen talked about and non of the tuning companies or fellow track users (today) had any experience off. However manic172 would probably be better placed to answer if its worth it for a daily driver.
I will be honest and say I had not come across the fuel cooler before and I would suggest you need to decide what you want from your car. Mine is very much track focused so the second cooler was a) cheaper than replacing the main rad and b) it came as standard kit on the Golf R.
Cant see any benefit with regards to temps but its an insurance policy.
From what I have read about the fuel cooler I cant see a need for me to have one and certainly I am not sure you are going to get a huge benefit from it on a road car, however as I said its not a bit of kit I have seen talked about and non of the tuning companies or fellow track users (today) had any experience off. However manic172 would probably be better placed to answer if its worth it for a daily driver.
@tracktoy Thanks for your insights! I like to try stuff, but in the end it will stay a road/daily car. I was unaware that the Golf R had a secondary cooler over there. As this is a shared platform, it makes more sense to add that secondary cooler as well instead of a fuel cooler.
Upgraded the well known coolant nipple with a billet version. Bought it on Aliexpress. Quality is great and fitment is 100%
Not that difficult to do and ensures a leak free nipple for many miles to come. My plastic nipple seemed ok, the O-ring was flattened & a bit hardened (which is normal after 10 years).
Comparison
Not that difficult to do and ensures a leak free nipple for many miles to come. My plastic nipple seemed ok, the O-ring was flattened & a bit hardened (which is normal after 10 years).
Comparison
This is the single torx bolt that you need to remove
Another angle
If you remove the cable harness, then it becomes visible
Zoomed out
New nipple in place
Zoomed out again
Another angle
If you remove the cable harness, then it becomes visible
Zoomed out
New nipple in place
Zoomed out again
Similar threads
