Oz alloy's and brembo clearance

[Rosco906]

Been offered these. What they called?

Also et is 46/48 he said 46 but photo to me looks like 48.

Would they clear the brembo's on the Leon cupra R?

 

[Bouncerbeater]

I have a set of 45 on my cupra and need a set of 10mm spacers just to clear the cupra calipers so Brembos will need more I expect
Haven't actually tried them on my lcr yet

 

[Rosco906]

Any pictures of them on your cupra?

 

[Bouncerbeater]

Sorry mate, let me rephrase. I have a set of alloys in 45 offset. Not the same ones. Do think the five spokes will look good though, classic style. Here's mine with spacers.

Sent from my iPad using Tapatalk

 

[Rosco906]

Hoping to arrange to go over and trial fit one.

Or may risk it and just take them

 

[Bouncerbeater]

That's not a bad shout, obviously you will need 10 mm spacer minimum though
They from a Subaru ?

 

[Rosco906]

Yeah. Subaru/Celica

Got 20mm spacers on the rear the now can test with one of those.

There not wide Tho. 7j.

 

[Bouncerbeater]

Should be ok, this a handy little site worth looking at re fitments
http://www.willtheyfit.com/index.ph...ameter2=18&wheelwidth2=7.5&offset2=35#content

 

[Rosco906]

^ if worked out right I need 16mm spacers so the 20's would do it.