Carmats.co.uk

rear lights

Check my r/r mate, did it last week I really like it.

Completely illegal as my reverse and indicators are now red!

I will be doing the red fly eye kit, just abou to take full pics aswel but this gives you the idea

5ad5a910-057c-7c7f.jpg
 
Wow that looks amazing! Almost wish I didn't get a red LC now :( really changes the back of the leon, did you use Lamin-x??
 
Get some green bulbs and your indicators will flash orange, i sed lamin-x on my old Golf lights that had the red film on and used the green bulbs and hey presto, orange flashing indicators. Them red rears look tempting, may invest in some lamin-x
 
lostleon said:
Right was thinking of changing the rear light's as I'm getting a bit bored with them, came across these in a picture.

http://cgi.ebay.co.uk/Milltek-Cat-Back-Exhaust-Seat-Leon-Cupra-R-210-225-/320561122958?_trksid=p5197.m7&_trkparms=algo%3DLVI%26itu%3DUCI%26otn%3D4%26po%3DLVI%26ps%3D63%26clkid%3D757256076604963875

I was thinking using Lamin-x or something to cover the lenses, what does everyone think?
Red on red too much??
Click to expand...

They are my lights tinted up, can see the square of leds.
 
thats the link i posted up, however having spoke to Neil at Lamin-x .co.uk, he advises that you should use LEDs, and has sent me a pm regarding it. Ill try and get him on here to clarify. Disclaimer, the green bulbs that I posted up worked on my Mk2 golf, I cant guarantee it will work on any other car
 
Lamin-X.co.uk said:
How do lads, I was pointed this way by Oldskool.

I can confirm that in the UK, the reverse lights aren't part of the MOT, but this will obviously differ for the rest of the world.

Regards the indicators, we used to supply the green bulbs but they were a little hit and miss.

The problem is that every model/light has a different reflector size/shape/design and the green bulbs only tended to give an adequate orange/yellow colour 50% of the time, so we stopped selling them.

Yellow LED bulbs with the relevant resistors work much more of the time, but please do be sure to buy good quality ones. They should have both forward and side facing LED's as pictured above in Oldskools post.

Be sure not to mount any resistors on/near plastic as they get very hot. They basically imitate a 21w bulb.

I hope this helps.
Neil.
Click to expand...

I will be doing this asap, any preference on make or place to buy from?

Cheers for your input
 
I put some on my passat headlights, best thing is to heat it up using a hairdryer/heat gun, gently and it goes floppy, makes it easier, then squeeze out any bubbles, dont worry if there are any smaller ones as i believe that the film is breathable so bubbles do eventually work them selves out. This is what i did, however best to check with Neil at lamin-x.co.uk
 
You must log in or register to reply here.

Similar threads

drka-drka
Lambda spacers for LCR de-cat MOT
Replies
16
Views
4K
drka-drka
drka-drka
Intercooler
Replies
5
Views
1K
virdi
virdi
wayne n
Rods
Replies
10
Views
2K
wayne n
wayne n
ianmessy
Will this Induction Kit fit my LC180
Replies
23
Views
4K
ianmessy
ianmessy
Rob Kelz
New TIP for 180 leon cupra
Replies
20
Views
4K
Buckroger
Genuine SEAT Parts and Accessories.
Top Bottom
Back