Resistors

[adam cupra 20vt]

Quik bit of help needed.....I'm removing my secondary air injection system and need a 10 watt 330 ohm resistor to put in the plug socket so the ecu doesnt think the pump has been removed.

I can't find any tho? I rang Maplin just now and they said they don't do 330ohm but I see people on here have bought them and just wondered where you got them from?

Any help appriciated

 

[DPJ]

Clicky

 

[adam cupra 20vt]

Is it ok to use 12w instead of 10?

 

[DPJ]

There's some 11w on the same page.

 

[adam cupra 20vt]

Cheers mate...I take it there ok to use?

I don't know that much about resistors.

 

[DPJ]

The 11w will be fine
Technical specification
Power rating at 70°C 9.5W
Power at 25°C 11W

 

[adam cupra 20vt]

Cheers for that.

Would these be ok?

http://cgi.ebay.co.uk/W23-330R-RESI...14&_trkparms=72:1683|66:2|65:12|39:1|240:1318

I have an ebay account so would be easier for me to order them if they will do?

 

[adam cupra 20vt]

I hope there ok cause I've ordered them

 

[Markyboyt]

Was it ok adam?
My motor is doing the aeroplane trick now, easy fix but I might remove it anyway

 

[adam cupra 20vt]

I fixed it instead mate, only took 30min to remove, repair and refit

 

[rikwheeler]

Sorry for reopening an old thread but my query is related to the same issue.
Need a resistor to replace the N249 valve and also to replace the sensor in the charcoal filter as I've removed that. Is this resistor the correct one to get?:
http://uk.rs-online.com/web/search/...od=searchProducts&searchTerm=666-1752&x=0&y=0