-
Guest, 🎅🎄Looking for a stocking filler idea? Why not treat yourself or a loved one to our high quality CUPRA or SEAT valve caps. Order now from the merchandise store
from what others have said it doesnt. i haven't done it but would like to put the spacers on mine. where do you get those hub spacers from guys? and how much?
Ric 2001
Need an ID-ten-T form
Found eibach ones for £65 but need to add the price of longer wheel bolts onto that. http://www.motorsportworld.co.uk/frame-detail.asp?PAGE=/manranges.asp
one of the best mods i have done was to fit 20mm rear spacers car handles so much better alot less twitchy at the rear . the wheels now fill the arches .
shouldnt rub on the coilovers as the wheels will be further away from them
hubcentric spacers availiable on ebay for £30 with bolts.
shouldnt rub on the coilovers as the wheels will be further away from them
hubcentric spacers availiable on ebay for £30 with bolts.
TBH these are something I wouldn't skimp on
See what bill @ badger5 can sort you (he has a section on the forum)
Normally i would agree with you whole heartedly as far as suspension and breaking components are concerned but we are talking about a flat disk of metal the ones i have are fully tuv tested have been checked on a lathe by a mate and have been fine. It think there is alot of brand overpricing with stuff like this .
Yes, i agree about the 'brand overpricing' but these are the things holding your wheels to your car. Yours may be OK and you seem satisfied with their quality, but I'm sure there's alot of dodgy ones on eBay too, if anyone was to buy them of there then you really need to know what you're looking for
Badger sells 15mm and 20mm spacers for the mk4
If your getting or have got coliovers on, it would be wise to get 15mm ones to avoid rubbing.
If your getting or have got coliovers on, it would be wise to get 15mm ones to avoid rubbing.
Deleted member 5985
Guest
http://www.seatcupra.net/forums/showthread.php?t=96895&highlight=mk4+spacers
Seems like the rear track is less than 10mm shorter than front. 5mm each side?
Seems like the rear track is less than 10mm shorter than front. 5mm each side?
The FK ones are TUV approved and are made from aircraft grade alloy. Some of the Ebay ones are made from steel. Here is a link to the FK ones:
http://www.gsfcarparts.com/fkauto/
http://www.gsfcarparts.com/fkauto/
If nothing else, they will improve the look at the rear; as standard the wheels are tucked too far under the arches.
(I seem to recall someone describing the rear of the Ibiza as looking like "a dog having a dump"
)
Similar threads
