single din fascia fitment??

[CRAIGLCR]

does anybody know how easy it is to fit a single din fascia into a leon?? tried a search for guides to no avail!!!! just going to change my standard lcr black one to the silver one of the cupra!! any ideas??

cheers

 

[Icecavern]

easy enough.

Remove the ashtray by removing the screw inside it.

Then undo the 2 torx screws behind the ashtray.

Remove the HU and there's another 2 torx behind that, one each side.

The facia then pulls off, there are some clips so it takes a bit of effort but it comes off.

 

[TllEWL]

Check your hazzard switch is the right size for the fascia too

 

[Pabs]

look in the guides section here:

http://www.seatcupra.net//knowledge...ble_din_dash_-_console_fitting_guide_543.html

You'll only need to step 3 (more or less)

I'm only suggesting this guide as the photo's may help you It's thanks to Pete that this guide exists (as I used his help to do it)

 

[CRAIGLCR]

cheers lads, printed that guide off pabs n going fit the silver one tonight. Will let you know how i go on!!!

 

[Rookwise]

In the guides section

http://www.seatcupra.net/forums/showthread.php?t=97135