VW cardiff! 2 thumbs up!
T Forbes V's Toasted Cup Cakes
T Forbes 1 - Toasted cup cakes 0
Tough little fukkers though!
T Forbes V's Toasted Cup Cakes
T Forbes 1 - Toasted cup cakes 0
Tough little fukkers though!
- Status
Just got the car back, went through MOT today. Service cambelt MOT tax and tyres all in the last month ouch. All thats needed now is a regular clean. lol
I got cambelt in march. This month has been turbo. Killed me.
On the plus side, turbo turned up today, and fair play its pretty much brand new, doesnt look like its been used. Got all my bits from VW that i need, along with G12 and synta gold at a bargain 32 quid for 5 litres.
Picking up the keys to my mates MOT place that me and jonzy will be using to fit the turbo on sunday.
Next to do is...
Passenger window reg
clutch master cylinder
fix cd changer
replace interior plastics
replace petrol flap lock
and thats it, minter. lol, until something else breaks.
But i'll be doing stuff for thr track day as well, brake fluid, tyres etc...
On the plus side, turbo turned up today, and fair play its pretty much brand new, doesnt look like its been used. Got all my bits from VW that i need, along with G12 and synta gold at a bargain 32 quid for 5 litres.
Picking up the keys to my mates MOT place that me and jonzy will be using to fit the turbo on sunday.
Next to do is...
Passenger window reg
clutch master cylinder
fix cd changer
replace interior plastics
replace petrol flap lock
and thats it, minter. lol, until something else breaks.
But i'll be doing stuff for thr track day as well, brake fluid, tyres etc...
Ooh Garage eh!
Coilovers need fitting nudge nudge!!!
Work for me tonight chasps, 12 hours sat infront of a PC, putting 2 people in contact with each other for an hour, and then im done, the rest of the 11 hours is rest, surfing and hopefully a chinesse and some sleep!
Coilovers need fitting nudge nudge!!!
Work for me tonight chasps, 12 hours sat infront of a PC, putting 2 people in contact with each other for an hour, and then im done, the rest of the 11 hours is rest, surfing and hopefully a chinesse and some sleep!
pm me the addy phil, i'll pop over on sunday and say hello, possibly without my cupra so I'll be needing a hug from all of you goodbye lol, only joking as if i'd leave you gayboys alone without me!
I forgot to ask you too tom when did you join fallout boy too? I didnt notice you singing until i started watching MTV the other night....
Cleaning session / general cupra matenence round mine saturday if anyone wants to pop round for a cuppa
I forgot to ask you too tom when did you join fallout boy too? I didnt notice you singing until i started watching MTV the other night....
Cleaning session / general cupra matenence round mine saturday if anyone wants to pop round for a cuppa
Just watched that. Loved the guy just knocking on peoples doors and standing there. LOL I was pissing myself.
StanTheMan
Guest
As long as it's not a 1.4 or 1.6 for a few months!
I'm working on Sigma Crankshaft line now. There’s a machine there that rolls the cranks to make them stronger, they roll the top part stronger than the bottom part.
A piston went on the machine a month ago so we had to remove the whole machine from its caging and replace it. After stripping the machine they fitted the part 180 degree's out.
So now the machine rolls the bottom half stronger than the top half now, so there could be a chance that the cranks may give up.... they make 900ish a day and this was almost a month ago
They not too sure if they will snap but really with the other stuff they do it should be okay, unless the customer decides to tune it
nah theyre boring as **** and as trick as RS tubos or cossies are id never sell one shitter for another thats 15 years older
ohyeah, i bum raped an ST up to 120mph yesterday on the M4 until it moved over and let me pass
- Status
Similar threads
