i have a seat leon cupra 180. i curently have a pipercross induction kit and forge dv. by new year i will have a full exhaust system inc 3in downpipe and sports cat. could i go for a stage 2/custom map with the standard intercooler, answers much appreciated thanks
Stage 1 remap or stage 2????
- Thread starter TAFFY aka beast
- Start date
I have...ran thru the summer ok, was only impacted on the hottest of hot days...
you wont need a fmic for stage 2 on a cupra. it will help you get the most from the power during the summer though.
mine made 242bhp with just a sports cat/downpipe with a stage 2 remap. theres not much more to squeeze out of the k03s.
but definatly get a custom stage 2 map... for the extra cash youll get better results from your new zorst.
mine made 242bhp with just a sports cat/downpipe with a stage 2 remap. theres not much more to squeeze out of the k03s.
but definatly get a custom stage 2 map... for the extra cash youll get better results from your new zorst.
info
Can you advise me in what I can do with my cupra.Have not had it long.
was looking at a stage 1 re map with Revo.Any good ?
oh ... i thought the LC's needed one before the stage 2.. .
nevermind
Can you advise me in what I can do with my cupra.Have not had it long.
was looking at a stage 1 re map with Revo.Any good ?
revo's are good mate it will transform the car into something special
they will put a 5hour driving trial on for free. you should try it
they will put a 5hour driving trial on for free. you should try it
Ozzy,
Before you remap, you should seriously consider a couple of minor mod's:
DV (most favoured by SCN is the Forge 007P)
Induction (various options, but you should consider assisting the breathing)
If limited by funds / insurance then Stg.1 is a good start, will realise ~ 15-25 more BHP straight off the bat.
I chose to get as much done before I remapped, purely so that I got the most from it.
The map was the last thing I did after all the mod's listed in my sig.
Have a nose around on the various Re-Map sites / suppliers and see which one you like the read of most.
Also have a nose around the forum, as this topic is fairly regular on here.
Also see if you can get along to some of the meets, and ask a nice fella SCN'er to take you our for a spin so you can get a feel for what you'll get for your money.
Hope that helps.
Dmm
PS - As per Lodgey - Revo & APR do 5/6hr free trials...always worth a go??!
^^^^^^^
what he said
YAY - 1st time anyone said that about 1 of my posts...I feel all grown up!
yea and the 4 bar fuel regualtor to but after that ill go for it.... i spoke to p torque and asked them what boot i would be running and they emailed me back saying Boost varies slightly, as your car will need a custom map due to the exhaust system. You'll run approx 1.4bar on overboost.With a full exhaust, we can make approx 230bhp and 265lbs/ft torque.
if thas wright 1.4bar which is what 17-20psi????
if thas wright 1.4bar which is what 17-20psi????
mate that is one hell of a mission!!! birmingham isnt it??? bet you used a lot of fuel on the way home hahaha
Similar threads
