Tom.'s Darkside Developments big turbo'd Ibiza TDI

Aug 19, 2007
1,149
2
East Yorkshire
So a year has passed, and the Ibiza has sat in my parents driveway since I parked it up after lifting the head last July.

Then last week I found the motivation I needed to crack on and get back into this project.

The plan is to generally tidy things up, lose a few bits, add a few new toys, and make it the car it was always planned to be. The engine is coming out to do the head gasket, fit a high lift cam, and just generally tidy it up, make some brackets for the intake pipe to secure it better, and paint it all up.

I'm ditching the water injection, as it had little to no benefit on this turbo/engine set up.

The reclining sports seats are going in favour of fixed back buckets.

More weight is being shed from the interior. Headlining and all pillar trims have gone, head unit and all speakers are gone, going to be grinding out the unnecessary brackets ect, and then painting all the inside to brighten it up a bit.
Also ditched the aircon, as it wasn't working anyway, and its a lot of weight for no benefit to be carrying around.

On the outside, the aero bumper has gone to a new home, and will likely be replaced by a standard item. Want to go back to more of an understated look with the car. Also planning on painting the car. Probably a matte colour, and using a roller haha. Paint/bodywork is crap anyway, so got nothing to lose in doing so.

Anyway, a few pictures of what I've done so far.





























Engine is now at a stage where all the loom, driveshafts, pipes ect are disconnected, and all that remains to remove it is lift it off the top engine mount and gearbox mount. Will be borrowing my mates engine crane once this baby turns up, hopefully on Tuesday.



Then the interesting work can begin.

That's all for now, but I'll try keep this thread up to date as I go.
 
Aug 19, 2007
1,149
2
East Yorkshire
Not to the same extent. I'm keeping the dashboard in, as I think it looks an awful lot better with it there. Likely end up caging it too.
 

snk

Active Member
Jul 29, 2012
43
0
what is the weight of all the ac parts? compressor, radiator and pipes?

good luck with the project!
 
May 18, 2013
190
0
stripping, as my leon is fully stripped, releases ALOT of weight. It really helps getting a decent time down the strip on my small K03 hybrid
 
Aug 19, 2007
1,149
2
East Yorkshire
So done a massive U-turn with this over the last week, and decided to break it for parts. Too much time/money required, and they are thigs I don't have enough spare of at the minute.

Drop me a PM if your interested in any of the parts.
 
Nov 25, 2007
1,892
0
Derby
Shame to see it goin mate.iv been looking for another Seat but want somthing bigger than the Honda as now the boys are born the Honda is to small.
 
So done a massive U-turn with this over the last week, and decided to break it for parts. Too much time/money required, and they are thigs I don't have enough spare of at the minute.

Drop me a PM if your interested in any of the parts.

thats a shame have been waiting for updates on this for a while.
there is a for sale section on here again now.
 
Last edited:
SWANSWAY CUPRA Dealership