• Hey Guest💡👉 We have just launched our new Dealer Directory and review service Find out more now
I would agree with Nightflight, it would be extremely fiddly, the holes for the screws are pre drilled and would be awkward to find. It is no hardship to remove the four bolts and tilt the seats back
 
Disconnect the battery, leave it about 30mins iirc then disconnect the connectors under the seat and it'll be fine


Sent from my HTC Desire using Tapatalk
 
Just ordered these!

I will also order the Lower Glovebox when it comes in!

Thanks guys, will let you know how I get one with the tasks lol!.
 
The lower Glove box intrigues me ..:think: Is it an additional glove box to the one already fitted ?:confused: forgive the stupidity
 
Last edited:
I fit the two boxes on Saturday with my dad. It's hard to get under to screw the nuts in so we ended up taking the seat bolts out temporarily. Took 20 minutes per seat as instructed. Pleased with the results :D
 
If you buy from Sere he gives the screws, else the sizes are given above in the OP and can be bought from any hardware shop.

YOu will need to buy the bolt screws off ebay though! (or a hardware shop)
 
Many thanks for the info and the pictures on this. Just managed to fit one under the passenger seat. Did it without removing the seat bolts, just! Took about half an hour of fiddling blindly under the seat, off to apply to be a gynaecologist now!! :lol:
 
Threadrevival.jpg


sorry to bring up an old topic. Did anybody else find the screws provided to be the wrong size or an extremely tight fit? Went to fit mine today, and it was erm challenging to say the least