bainsycupra
Guest
hi any one know what vaccum leon cupra r should run on tickover.mines at -8 does that sound right
-
Guest, 🚨New Stock alert: Premium CUPRA valve caps now available in the store 👉 Order now from the merchandise store
turbin
Guest
turbin
Guest
Mines around -22 as well.
Those at -8 you have a leak
I have logged extensively and this no evidence of a leak on my car.
I'm sure there was a thread on this not long ago. The conclusion IIRC was that a vacuum lower than approximately 20inhg (i.e between 0 and 20inhg) then you have a leak somewhere. Apparently the air con might make a difference to the reading if it's switched on. Around 20inhg or higher is normal.
Interesting, i will trible check my hoses.But if there is a leak its minor, i have logged boost at least 10 times over the past few week and everything looks normal.
Maybe if we could get more peeps posting what vacuum they are running at normal idel(not choke or with aircon on) for the LC and LCR we could get a better picture of what peoples reading are.
get posting peeps.
Maybe if we could get more peeps posting what vacuum they are running at normal idel(not choke or with aircon on) for the LC and LCR we could get a better picture of what peoples reading are.
get posting peeps.
When you say -8, do you mean -8inhg or -0.8bar. What units are you using? Because -0.8bar is 23inhg which is fine (no leak).
Also this was the previous thread http://www.seatcupra.net/forums/showthread.php?p=2773536
Also this was the previous thread http://www.seatcupra.net/forums/showthread.php?p=2773536
Last edited:
Similar threads
