Removed a nail from one of her tyres, replaced the valve on another, and got the wheel alignment done... About time the steering wheel was centred properly!

PS. Is it normal for the nsf wheel to have more negative camber than the osf wheel? Noticed it on the tracking machine but the guy at the garage said its fine... Yet she drifts a little to the left if the steering is left unattended...
 
just got the car back from getting the front end resprayed. 45k motorway miles in 2 years had done it's job with the stonechips! Got the car mopped last month and all it did was show up the stone chips. So i bit the bullet and i'm really happy. The car looks as good as new!
 
Removed a nail from one of her tyres, replaced the valve on another, and got the wheel alignment done... About time the steering wheel was centred properly!

PS. Is it normal for the nsf wheel to have more negative camber than the osf wheel? Noticed it on the tracking machine but the guy at the garage said its fine... Yet she drifts a little to the left if the steering is left unattended...

The roads normally have a slight camber to allow for drainidge so it's normal for car to drift to left as the road cambers off that way, never herd of one wheel being more cambers than the other?
 
Yeah, I want to try it on a relatively flat carpark and see if there is any difference. The machine had all the readings in green, except the camber for the n/s/f wheel, which was red. Think it was about -1.3ish...?
 
changed the rear passenger wheel bearing ......was fun when it split in 2. Done passenger side cv joint week or 2 ago still got something loose on that side.
 
done nothing today, only receive gearbox oil (from ebay) :) may on weekend change it
SS850004.jpg
 
Got my cat back stainless steel exhaust fitted to my car at long life exhausts while visiting my family in swansea. Here some pics.
2011-11-24110240.jpg

Some may not like my tip but I wanted it simple but different to what every Leon owner wants.
2011-11-24110413.jpg

2011-11-24110315.jpg
 
Today I finished fitting the engine from my cordy into my Mk4 golf, what a flippin slog of a job that was. Don't have the proper facilities but it's running like a dream so I'm fell chuffed.
 
lately been useing car for my boys quad transdport !!

two planks of wood used as a ramp to drive into car ,

seats folded flat in it goes !!

also have oilcloth/vinyl chequered flooring cut to shap of my boot floor to help stop getting boot carpet dirty etc (did do it August mind)
 
Putting Leon 1.6 sx back to standard as it has some dodgy mods on it ready for it's new owner on Sunday! Carbon film was a Fu***+ to get get off! And took off the scaffold pipe back box for a standard one! Guy actually liked the wolfrace wheels! I could hardly hide my laughter!
And gonna clean the LPG up! It's filthy!
Ak