what have you done to your car today ?
- Thread starter seatcupramad23
- Start date
Fitted a new sump that i had an oil temp sensor tapped in for my new SPA Gauges, Changed Oil Pickup Pipe, Fitted Oil Cooler...... No leaks on sump either so i did good lol
lb cupra tdi
Guest
Piked up my cupra r splitter ready to fit tmoroweasy work?
http://www.seatcupra.net/index.php?option=com_content&task=view&id=529&Itemid=6
lb cupra tdi
Guest
Got the last of the bits needed to refurb my 225 wheel and finally got my stereo sorted! INstead of running a 4x150 powering 2 channels for 4 door speakers and 2 for the sub, I'm now running the same 4x150 powering one channel per door, and a new 500x2 amp for the sub. Needless to say my ears are now boxed!
removed and cleaned my inlet manifold and egr and made an egr restriction gasket then put it back together.
Serviced, new rear pads and discs and repaired the lambda sensor. Gave the inside a bit of vacuum and clean.
Noticed that the front drivers tyre had uneven wear on the inside so will have to the get the alignment looked at. Just another thing to add to the list of things that need doing.
Noticed that the front drivers tyre had uneven wear on the inside so will have to the get the alignment looked at. Just another thing to add to the list of things that need doing.
Drove a 130 mile round trip on an awesome Cumbrian 'A' road to visit family, then gave it a good wash/wax before settling down with a few JD's an browsing on here, all in all a good day
Fitted Hughes Engineering rear strut brace and went flying around bends to see what the buzz is about 
Yeah impressive, I can tell the difference but to be honest I can't really say how good the brace is on it's own. The suspension set up on the car now is pretty much complete and all together it works great
Similar threads
