what have you done to your car today ?
- Thread starter seatcupramad23
- Start date
nothing its broken awaiting parts
Ive got the toyosports downpipe and decat on mine, tight fit aint it !
Tell you one thing your in for a suprise cause ive got cobra catback resonated and thats fecking loud enough !
So will this fit then??
http://www.toyosports.co.uk/audi-a3-96-03-20v-18t-turbo-exhaust-down-pipe-decat-8900-1338-p.asp
But I do have a Miltek catback, so I bet it don't!!
Thanks
Last edited:
Yeah that will fit your car if its a cupra (not cupra R) cupra r are flanged (nut and bolt) where the cat meets the mid pipe, normal 180 cupras are slip on where the cat meets the midpipe.
So if yours is a cupra itl fit, if its a cupra r, it wont
my cobra is a 3" inch system cat back, and it slid perfectly inside that 
Polished mine, and took the 'mrs' to see a 03 LCR in black at our local 'stealers' which was described in the ad as being a 'immaculate local example' 64k, fsh, etc, but we were gutted to see it had a thick layer of dust all over it and that every panel was either chipped/scraped, bumpers had stress marks, all 4 wheels were badly kerbed, and the splitter was scuffed and badly fitted and to top it all when i mentioned all this to the sales guy his response was "what do you expect, its 9yr old after all" WELL DONT F***ING ADVERTISE IT AS BEING IMMACULATE!!!![[:@]](/forums/styles/seatcupra/oldforumsmileys/furious.gif "Furious [:@]")
Polished mine, and took the 'mrs' to see a 03 LCR in black at our local 'stealers' which was described in the ad as being a 'immaculate local example' 64k, fsh, etc, but we were gutted to see it had a thick layer of dust all over it and that every panel was either chipped/scraped, bumpers had stress marks, all 4 wheels were badly kerbed, and the splitter was scuffed and badly fitted and to top it all when i mentioned all this to the sales guy his response was "what do you expect, its 9yr old after all" WELL DONT F***ING ADVERTISE IT AS BEING IMMACULATE!!!
Lovely advertising in the advert though;
"THIS UNMODIFIED CUPRA `R WILL NOT BE IN STOCK FOR LONG! FINISHED IN BLACK MAGIC IT HAS COVERED ONLY 64,000 MILES"
£4995
B&H Motors..........
ah boo I have an LCR!
So Toyosports don't do one for the LCR? Because that's a great price for that kit
email the guy on ebay mate and ask him,
Lovely advertising in the advert though;
"THIS UNMODIFIED CUPRA `R WILL NOT BE IN STOCK FOR LONG! FINISHED IN BLACK MAGIC IT HAS COVERED ONLY 64,000 MILES"
£4995
B&H Motors..........
Haha yeh thats the one, looks 'ok' on the pics on the ad, I dont see why someone would bother with making sure their car has fsh etc if they are just gonna neglect the condition of the bodywork
would of looked good sat outside nose to nose with mine too (his an hers cupras lol)
Raised the idle speed on my LC180 to 132 after fitting the Powerflex Dogbone. Makes quite a difference, happy now
well yesterday i done some spirited driving around cardiff and other areas giving it a good run after the exhaust change. could not resist a few tunnel runs lol it sounds awesome for only a stock 180 cupra. morning start up at 6.30am on fast idle is a bit loud but its ok when its warm so i just start and quickly move lol.
hopefully do my coilovers today and the tip. finally got my map sensor flange to weld on to my intercooler pipe so hopefully have front mount plummbed in by weekend.
i will dig out my camera and take a few pics.
just browsing for a set of alloys atm. im keeping with the black ,yellow and blur colour scheme. yellow car , blue engine bay, black trimmings. so im looking at a set of volk rays et37
wheels in black with the blue volk rays stickers.
hopefully do my coilovers today and the tip. finally got my map sensor flange to weld on to my intercooler pipe so hopefully have front mount plummbed in by weekend.
i will dig out my camera and take a few pics.
just browsing for a set of alloys atm. im keeping with the black ,yellow and blur colour scheme. yellow car , blue engine bay, black trimmings. so im looking at a set of volk rays et37
wheels in black with the blue volk rays stickers.
Raised the idle speed on my LC180 to 132 after fitting the Powerflex Dogbone. Makes quite a difference, happy now
why have you raised your idle speed?? was it a bit rough?
i need to invest in a dogbone mount. second that ill order one now lol.
It was, resonated a bit too much in the cabin. Dogbone is an essential upgrade for every LC driver. Better power transfer and less shuddering!
just ordered new brake servo, pads, discs, top mounts, wishbone bushes and anti roll bars.
Going to spend my easter weekend giving the car a brake and suspension refurb.
Going to spend my easter weekend giving the car a brake and suspension refurb.
well i dont think adjusting my idle speed will help we with a non resonated exhaust lol. at certain revs on over run there is a lot of cabin drone lol
The drone comes from the stiffer Dog bone, not from my exhaust. I also dont believe the change in idle speed would fix your cabin drone. Therefore I will be buying a resonated version
i pretty much have a straight through exhaust with just a small backbox. it sounds good but can get a bit loud at certain times. it dont bother me i love it but i like a bit of stealth from time to time.
Similar threads
