what have you done to your car today ?
- Thread starter seatcupramad23
- Start date
Today I thought I'd treat her so I bought her some white sidelights, some silver / chrome bulbs for the indicators to go with the Nightbreakers I recently fitted although they really do need to be adjusted to line them all up properly as everyone keeps flashing at me 
Haven't fitted them all yet
Haven't fitted them all yet
Found out that rear spring had snapped, on the + side I had a new set of Eibach Sportline springs fitted
MOT carried out and all good for another year
MOT carried out and all good for another year
Looks nice that mate!!
What wax do you use? Should get a reflection shot up, love a reflection on a black car!
reflection you say ...
also before and after on my seats
Last edited:
Thanks bud car still not finished yet just been doing what I can in between working , don' t have a spare 3-4 days for a full 3 stage correction , cleansing glaze to remove the oils from the polish then seal and a wax , so just being doing a few panels at a time .
Sealed up the wiring loom box as im sure the leak was from there. Now wait till the weekend and dry my carpets if the weather is ok...
Sent from my GT-I9300 using Tapatalk
Sent from my GT-I9300 using Tapatalk
That's impressive mate, I love how well black shines up! What did you use on the seats?
I use some chemical guys nonsense in a wetvac , about an inch of nonsense in the wetvac topped up with water , soaked the seats and gave them a good scrub with a brush and sucked all the dirty water out and that's how they came up , the stuff that came out the seats was disgusting , don't know how the previous owner could drive about with seats so dirty .
Also the nonsense has no smell to it so when the seats dry there is no smell afterwards .
Thought I may as well do them while the seats were out as my doors were getting sealed up .
Also for anyone wondering what I used to machine polish the car with , I used chemical guys v34 compound with an orange hex logic pad , v36 polish with a white hex logic pad and v38 finishing polish with a black hex logic pad , I just gave those panels a quick layer of chemical guys black wax until the whole car is done and then il seal it with jetseal 109 and put 2 coats of chemical guys E-zyme wax on it.
Auction cupra
Nearly finished, bought a leather gear knob cover £6 ebay took a while to fit. Silver ring is a biatch gently prize, flat screwdriver 1/4 turn pops off,looks mint. Fitted new maf sensor next the final nightmare replace leaking hose, hoses. Then love my cupra a bit more whooosh
Nearly finished, bought a leather gear knob cover £6 ebay took a while to fit. Silver ring is a biatch gently prize, flat screwdriver 1/4 turn pops off,looks mint. Fitted new maf sensor next the final nightmare replace leaking hose, hoses. Then love my cupra a bit more
whooosh
Rangers, no.... Norwich City if anything, not that in to footy though to be honest. As for the guy doing this on a Cupra, i had a word with him before i started this... inspirational work.
(Guide for the cluster & End Game) The instrument cluster will be my worst nightmare though as it'll take my car off the road. Cheers dude.
Work in progress...Just noticed... i should really update my avatar and sig... that's my old Cupra lol.
Last edited:
Similar threads
