Is Portugal as rainy as the UK though?Not a single drop of water in this swimming pool with wheels yet.
-
Guest, 🚨New Stock alert: Premium CUPRA valve caps now available in the store 👉 Order now from the merchandise store
what have you done to your car today ?
- Thread starter seatcupramad23
- Start date
Failed mot
Washer pipe blown off due to cold
Broken spring on the rear
Done well i think
leon mk1 cupra
Washer pipe blown off due to cold
Broken spring on the rear
Done well i think
leon mk1 cupra
I have a set of h and r springs which I’m looking to off load.
Good condition 60 quid collected.
Badger5 Custom Map + TIP,
3”Custom exhaust, FMIC, Bosh 550’s, BC Coilovers, ARB’s +loads more.
Thanks mateI have a set of h and r springs which I’m looking to off load.
Good condition 60 quid collected.
Badger5 Custom Map + TIP,
3”Custom exhaust, FMIC, Bosh 550’s, BC Coilovers, ARB’s +loads more.
Im from Birmingham you far off?
leon mk1 cupra
First drive in almost 2 weeks, started fine so when warmed up drove it like I stole it....******* thing still puts a smile on my face !!
Ive got a brand new replacement for now
Im currently house hunting so worst case my leon may be up for sale depending on what we come across but its unlikely
If i dont sell it il message to see if you still have them by then
leon mk1 cupra
Not me but the missus drove it back from work and the emissions amber light came on 
, wonder if this is the aftermath of fitting a decatted downpipe??
Sent from my iPhone using Tapatalk
, wonder if this is the aftermath of fitting a decatted downpipe?? Sent from my iPhone using Tapatalk
Do you need a post cat lambda sensor spacer??Not me but the missus drove it back from work and the emissions amber light came on
Sent from my iPhone using Tapatalk
Tuned, but not to anything too crazy. Just the most you can get from a K03 hybrid is the plan.
Fitted my new seat today.
As per usual,loads to mod.
First mod runners to fit side mounts.
Then fit subframe. Not just a five minute job.
Seat removal easy.
Loose fit subframe add seat. Sit in it. Knees hit steering wheel.
Get grinder out and reduce height by a couple of inches.
Re fit, add seat. Try it out all ok.
Then take all out.
Mod the subframe to take runners. Problem is they put plenty of holes right about where you want them. But about 5 mm out here or there.
Loads of measuring. Then drilling.
Then find you’ve measured to a different hole and you need to redo one of them.
Grrrrrrrr
Measure about a hundred times, drill another hole.
Bolt the subframe to runners,
Check it slides.
Must be square.
Fit back in place.
Bolt front.
Bolt rear.
Start tightening rears and snap the nuts off the retaining plate, which are meant to be welded in place!!!!!
They weren’t even tight when they sheered off!
Glad they broke now, as opposed to in a crash.
Seat would have been held in place with a 5 mm bolt at the front only.
Holy kumquat Batman!!
Badger5 Custom Map + TIP,
3”Custom exhaust, FMIC, Bosh 550’s, BC Coilovers, ARB’s +loads more.
As per usual,loads to mod.
First mod runners to fit side mounts.
Then fit subframe. Not just a five minute job.
Seat removal easy.
Loose fit subframe add seat. Sit in it. Knees hit steering wheel.
Get grinder out and reduce height by a couple of inches.
Re fit, add seat. Try it out all ok.
Then take all out.
Mod the subframe to take runners. Problem is they put plenty of holes right about where you want them. But about 5 mm out here or there.
Loads of measuring. Then drilling.
Then find you’ve measured to a different hole and you need to redo one of them.
Grrrrrrrr
Measure about a hundred times, drill another hole.
Bolt the subframe to runners,
Check it slides.
Must be square.
Fit back in place.
Bolt front.
Bolt rear.
Start tightening rears and snap the nuts off the retaining plate, which are meant to be welded in place!!!!!
They weren’t even tight when they sheered off!
Glad they broke now, as opposed to in a crash.
Seat would have been held in place with a 5 mm bolt at the front only.
Holy kumquat Batman!!
Badger5 Custom Map + TIP,
3”Custom exhaust, FMIC, Bosh 550’s, BC Coilovers, ARB’s +loads more.
Bucket seat and Subframe. Continued...
Took my broken parts for my seat subframe indoors.
On closer inspection they weren’t welded bolts, just have a retainer which I fixed.
Battled with the seat still in place more or less and once plates were reattached correctly it became obvious that the subframe is about 10-15mm too thin.
Meaning one plate fits into the original runner but the other side is 10mm short of locating into the runner.
Long and short I’m going to buy longer bolts and sleeve them with poly washers. This should allow the plate to extend further away from the subframe, allowing it to locate.
Anyone fitting an OMP subframe will most likely have the same problem.
Sent from my iPad using Tapatalk Pro
Took my broken parts for my seat subframe indoors.
On closer inspection they weren’t welded bolts, just have a retainer which I fixed.
Battled with the seat still in place more or less and once plates were reattached correctly it became obvious that the subframe is about 10-15mm too thin.
Meaning one plate fits into the original runner but the other side is 10mm short of locating into the runner.
Long and short I’m going to buy longer bolts and sleeve them with poly washers. This should allow the plate to extend further away from the subframe, allowing it to locate.
Anyone fitting an OMP subframe will most likely have the same problem.
Sent from my iPad using Tapatalk Pro
Finally got round to swapping out the old style (and rattly) mirrors to the facelift ones that spudboy6 kindly sold me. I'd bought new black covers with the intention of getting them colour coded but now they're on I like them all black to be honest.
Also while the door card was off I fixed the window switch that somehow my dad had managed to pop the white window section through (the bit that lights up). Oh and gave her a long overdue clean too.
Also while the door card was off I fixed the window switch that somehow my dad had managed to pop the white window section through (the bit that lights up). Oh and gave her a long overdue clean too.
Similar threads
