https://r.tapatalk.com/shareLink/to...3&share_fid=1220&share_type=t&link_source=appAny reason why you pulled it out.. or was you just bored on a rainy Saturday afternoon??
Thai's grey mk1 Cupra R
Sent from my SM-G960F using Tapatalk
https://r.tapatalk.com/shareLink/to...3&share_fid=1220&share_type=t&link_source=appAny reason why you pulled it out.. or was you just bored on a rainy Saturday afternoon??
Just checked the nappies - it's gone from swamp to bone dry overnight! They must have soaked up at least two litres. Get 6+ size - the biggest and most absorbant.
nice how long did it take you ?Pulled the engine out.
Sent from my SM-G960F using Tapatalk
no just the seal on top of the polenfilter should be fitted right. you can feel the underside of handglove cabin if its wet. otherwise bigger chance it coming in through the door. should just check if the doorcards behind the panel are kitted or orginal.Im about to give this a go! My driver floor is a small puddle after all the rain here in Germany and my windows have literally water on the inside all over them!
So I will check the door seals... and the cabin filter seals... anything specific I’m looking for? Ripped rubbers or what?
Sent from my iPhone using Tapatalk
Im about to give this a go! My driver floor is a small puddle after all the rain here in Germany and my windows have literally water on the inside all over them!
So I will check the door seals... and the cabin filter seals... anything specific I’m looking for? Ripped rubbers or what?
Sent from my iPhone using Tapatalk
Check underneath scuttle panel either side of car
Where the filter housing for pollen filter is, it can clog up with debris and decomposing leaves behind and to sides of housing. This blocks drainage holes that drain to the front wings.
Mine were full of crap on both sides.
Badger5 Custom Map + TIP,
3”Custom exhaust, FMIC, Bosh 550’s, BC Coilovers, ARB’s +loads more.
no just the seal on top of the polenfilter should be fitted right. you can feel the underside of handglove cabin if its wet. otherwise bigger chance it coming in through the door. should just check if the doorcards behind the panel are kitted or orginal.
I spent about 3 hours prepping the area, jacking it up, assessing everything, draining fluids and removing the bumper on Thursday afternoon then approx 8 hours carefully removing everything on the Friday.nice how long did it take you ?
I started the car up today and the throttle was surging up and down and it sounded like it was running on 3 cylinders ... turned it off and back on did it again.
Then I turned it off ... wiggled and hard tapped all 4 coil packs ... started right up and drove fine!
Want to order 4 coil packs and 4 spark plugs to have on reserve if anything happens on the road. Brand recommendations? Ill be going with copper plugs but need help with coil experiences
sent from my iPhone using Tapatalk
I love it when parcels are waiting for me at work...
View attachment 10569
20mils the charm ladNowt wrong with adding a bit of girth.lol
Sent from my iPad using Tapatalk
20mils the charm lad
20mm on each corner big T, do you think you’ll get any rubbing on the arches.
Sent from my iPad using Tapatalk
i got the redtop coils. seems to run a little smoother. but thats about it.I started the car up today and the throttle was surging up and down and it sounded like it was running on 3 cylinders ... turned it off and back on did it again.
Then I turned it off ... wiggled and hard tapped all 4 coil packs ... started right up and drove fine!
Want to order 4 coil packs and 4 spark plugs to have on reserve if anything happens on the road. Brand recommendations? Ill be going with copper plugs but need help with coil experiences
Sent from my iPhone using Tapatalk
there is loads on facebook running 20 mils all round.20mm on each corner big T, do you think you’ll get any rubbing on the arches.
Sent from my iPad using Tapatalk