Which front wishbones.

[paulos44]

Hello all....
as the 2 front wishbones on my Tolly 20vt were an advisory on the MOT 11 months ago,i have made the decision to replace them and balljoints....but what make to buy ???
Theres Febi, Moog,Monroe, FAI, Comline, Lemforder, Delphi etc etc....all at different prices.
I suspect that the majority of them are made in a couple of factories in deepest China but what do you all think ??
Cheers.

 

[Andrewwright]

Delphi is UK based, I've been and dropped of in there factory before. Very nice factory indeed. Can't speak about the rest

Sent from my Nexus 6 using Tapatalk

 

[paulos44]

Oh ok....That's good to know...Thanks.

Sent from my XT1039 using Tapatalk

 

[sockpuppet]

I used a febi track rod and was impressed by the quality, the finish was better than the part I removed and also a fraction of the cost. A lot of the non oem parts have a much longer warranty as well.

 

[verbal_kint]

I replaced all mine using standard stuff from Eurocarparts, opted for Lemforder but they do cheaper brands. All should be fit for purpose and have same warranty.

If you are buying from them best keep an eye on the discount level or haggle in the branch.

Also if you have any intention of upgrading the bushes to polys then easier to do this now while it's stripped down.

 

[mty12345]

I've used lemforder and delphi and they were both good quality. As above eurocarparts have 'sales' nearly every weekend