will the new shape audi s3 wheels fit my cupra r

[nick-barnes07]

hi im just wondering if audi s3 wheels , the newist s3 not old ones will fit my car , as im looking at buying a genuine set from audi, they are 19inch but im not sure if they will fit over the caliper , any one got any pics , thanks nick

 

[RobM]

Have a look in the Audi discussion forum at coxw's post. On the last page (I think) he posted some up-close pics of the brakes through the wheels. From the look of it, it should clear the Brembo's easily, as the S3 callipers themselves are pretty damn big!

If all else fails, some small spacers should do the trick.

 

[kenny-cupra]

the new Audi S3 have 5/112 stud pattern and the Leon cupra r are 5/100 , unless you fit adapters , they will not bolt straight on .

Cheers Kenny

 

[TllEWL]

Not the new S3 no - the wheel PCD (hole spacing) is 5x112mm

Your LCR is 5x100mm

 

[nick-barnes07]

okay cheers, looks like ill have to stick with the standard wheels

 

[SHADY-NINJA]

change of hub calipers, discs and pads and it will fit.
but it will cost ya.
why not wait till the replicas come out then you can fit them.

 

[kenny-cupra]

change of hub calipers, discs and pads and it will fit.
but it will cost ya.
why not wait till the replicas come out then you can fit them.

would it not be easier to just put a set of 5/100 to 5/112 adapter as audi wheels are now running high et (about et48) but a leon cupra ( et 38) and Cupra R ( et 35-38), alot cheaper that changing all those parts

Cheers Kenny

 

[nick-barnes07]

change of hub calipers, discs and pads and it will fit.
but it will cost ya.
why not wait till the replicas come out then you can fit them.

Dont like replicas , and it is cheaper for me to get originals as my mate gets cheap wheels .

 

[nick-barnes07]

what wheels fit cupra r s then , vw or audi , that are going to look okay as well , thanks nick

 

[andyj]

Mk-IV R32 wheels are 18's and 5x100......

Not sure if they clear Brembo's though.....

 

[andyj]

apparently the old S3 17's clear Brembo's.....

there's a Euro LCR in the 'Pics' section that's got them fitted.

Link: http://www.seatcupra.net/forums/showthread.php?t=115285

 

[andyj]

and the 3.2 TT Rims are also 18's and 5x100

 

[Feel]

I've often wondered if the TT Quattro Sport wheels would fit/what they'd look like...

TTS do them.

Edit, or the Nuvolaris

 

[willcooke]

I've often wondered if the TT Quattro Sport wheels would fit/what they'd look like...

TTS do them.

Edit, or the Nuvolaris

TT quatro sport (I think) wheels....

http://www.seatcupra.net/forums/showthread.php?t=90656

It's since been lowered and the facelift upgrade is about halfway through.

Once the coil overs went on I needed spacers to clear the springs, but before that they were fine.

 

[Feel]

Hmmm, I spotted them because they look bigger than 18", but they look "wrong" on your pics (sorry). Maybe it's the lack of a body kit?

 

[willcooke]

Hmmm, I spotted them because they look bigger than 18", but they look "wrong" on your pics (sorry). Maybe it's the lack of a body kit?

I know what you mean, with the new front bumper and lowered it looks better. I'll try and get a new piccy.