powerflex exhaust mounts

[JIMYU]

does anyone know which exhaust mounts the ibiza needs from these:

http://www.powerflex.co.uk/exhaust.asp (click "drawing")

I thought number 1, 5 or 8?

 

[tashacupra]

hi, i got the 005 one's they work a treat much better then the standard items, i take it you have noticed you will need to cut the brackets on the 2 back box mounts then swap the mounts over and put a bolt through the bracket to hold it all together. hope that helps.

 

[Cupra20]

005's are the ones to go for mate, they sorted my problem out a treat.

As tashacupra says you have got to cut the rear brackets and put a bolt in.

If you need any pics just say

 

[__B3NNY__]

005 here too sorted out my exhaust knocking

 

[JIMYU]

005's are the ones to go for mate, they sorted my problem out a treat.

As tashacupra says you have got to cut the rear brackets and put a bolt in.

If you need any pics just say

thanks guys.

Pics would be very helpful please mate, I didn't know about the cutting and bolt...

 

[JIMYU]

005 here too sorted out my exhaust knocking

thats what i'm getting them for too, did you change them all? (how many are there?)

I was thinking of just changing the rear mount as thats the one that seem to be under the most pressure.

 

[Cupra20]

There are 3 mate, 2 on the back box and 1 on the mid box

This is a pic of one on the back box which you have to cut the old rubber off, by cutting the bar out of the middle and replacing it with a bolt.

Hope it helps if you need a better pic i will try and get one in the week for you.