what have you done to your car today ?

[Kingscote]

Washed polished and waxed mine so it looking very shinny

 

[JDUB 20V]

Managed to change oil/filter, changed boot seal and adjusted the ball joint positioning and took for blast!

 

[bkingb]

cleaned the car inside and out, also waxed the car looking good as new!

 

[W11TTX]

Stripped the old wishbones and put em on eBay

Also set up the new coilovers but the helper springs at the top are very compressed and don't kno if they are right or wrong?

 

[FroggyLCR]

Well decided today, my car is never going to get on any show and shine concours's. Its now full of dog hair and sand lol!

Recently started helping with a dog charity and had a walk on the beach today, some 40 odd German Shepherds

 

[joshy514]

Stripped the old wishbones and put em on eBay

Also set up the new coilovers but the helper springs at the top are very compressed and don't kno if they are right or wrong?

My helper springs just compress fully with weight on

 

[W11TTX]

That's a relief. Had one slight problem one of the Allen keys in the top turn in the thread so I hope it isn't knackerd! Won't be impressed if it is!

 

[Mk1 banana]

Gave my bay a bit of a clean up

Sent from my iPad using Tapatalk HD

Looks crackin'!
How much effort was it to shine up the inlet manifold?


Made in Spain, made better in England 223.3hp 263.8lbft

 

[csd_19]

Changed my cracked OE manifold out for a non-cracked one lol.

Nice to drive the car without the smell of exhaust fumes coming into the cabin! (anyone feel sleepy?? )

 

[Tessitura]

Set the clock an hour back on the stereo.

Atleast its progress!

 

[Paul43]

Clocked up 90,000 miles today

 

[8bit]

Changed my cracked OE manifold out for a non-cracked one lol.

About feckin time!

 

[8bit]

Washed it and took a few photos (more in my RR thread in a minute)

Also serviced my 008 valve with the new, revised piston. Before I took it apart I gave the side port a good clean, stuck it in my gob and blew hard into it. I could hear and feel air escaping through the bottom port, not a massive amount but once I'd serviced it there was no more air escaping due to the new piston having a rubber seal on the bottom. Worth doing I'd say.

Quick shot of the old and new pistons:

 

[8bit]

Set the clock an hour back on the stereo.

Atleast its progress!

No it's not - supposed to go an hour forward in spring time dude

 

[Rob Kelz]

Looks crackin'!
How much effort was it to shine up the inlet manifold?


Made in Spain, made better in England 223.3hp 263.8lbft

Thanks mate,caws quite a big of effort still needs finishing off t be honest like th bottom of it and the end by the throttle body its just time to get round to it lol

 

[LEE69]

Put my new red 12 months disc in the window, preferred the colour coded one from last year lol

 

[Dozer360]

from my RR

yesterday i just had time to fit my flyeyes before the southern customs meet. (i also cleaned the grubby bits up in the engine bay but didn't have time to take photos.)

one done

normal light

flyeyed

Stealth

Still fine driving at night

i also went to the southern customs meet in southampton

 

[wasps69]

Laughed at the obvious april fools story on the homepage!

 

[W11TTX]

What was that?

 

[cupra.al]

What was that?

http://www.seatcupra.net/index.php?option=com_content&task=view&id=1358&Itemid=1:lol: