what have you done to your car today ?

[akchappers]

Yes Steve they came out really good! But because I want a really really high end finish on the blue one now I'm having them professionally sprayed in body colour although I may have a silver rim yet. Undecided!
Send your wheels to me! Il do em! Oh yea I'm kev if AK is no good! Lol

Ak

 

[traumapat]

Road tax.... 225.00 Maybe I should ring them and tell them is a Cupra so it should be 180

 

[GTTIM]

Secondary air pump being blowing on my 04 Cupra for ages.

I dont have ramps or anything to get enough access to remove it and drill out the old rivets and replace with nuts and bolts. So, I decided to use some good ol' JB Weld! (other epoxy derivative glues are available and will probably work just as well!).

Basically I test cold started my car and held the bottom of the air pump together by hand to test my proposed repair effectiveness. Worked a treat.

Along the accessible lower edge I smeared a small amount of jb weld, trying to work it into the gap and clamped it and smoothed over the excess. Although the gap is small the amount of force required to close it is minimal (easily done between finger and thumb).

Removed the clamp this morning (left myself a note on the drivers seat just in case i tried to drive off with it still in place) and started her up. Success! - no nasty derv-like noises! Hopefully it will hold long term. (if not nothing lost though really)

I understand on some VAG cars the pump is actually just a sealed unit so can't be retro fitted with nuts and bolts. In those cases this is very much worth a go as a cheap option.

 

[BoostHard]

Why not just delete the SAI and EGR?

 

[GTTIM]

Why not just delete the SAI and EGR?

I probably will do at some point (when i can find the time!)

 

[fr 150 boy]

Fitted new brembo brake pads to the front of my leon.
The pins on the o/s was very tight!!! Got there in the end!
How much are the pins, just out of intrest for the brembo calipers,from the stealers?

 

[xDaNx]

Fitted new brembo brake pads to the front of my leon.
The pins on the o/s was very tight!!! Got there in the end!
How much are the pins, just out of intrest for the brembo calipers,from the stealers?

Pretty sure they're stupidly expensive for what they are.

 

[Ronin225]

Think they are about £80

 

[akchappers]

Fitted new brembo brake pads to the front of my leon.
The pins on the o/s was very tight!!! Got there in the end!
How much are the pins, just out of intrest for the brembo calipers,from the stealers?

Just use one of these mate. Much cheaper!

Ak

 

[fr 150 boy]

Pretty sure they're stupidly expensive for what they are.

Thanks for the reply,guys

 

[fr 150 boy]

Think they are about £80

For 4 pins! Gold is much cheaper than that! Lol

 

[fr 150 boy]

Just use one of these mate. Much cheaper!

Ak

You got a point there,lol

 

[Rivva]

tried fixing my car.. still broke.

Any help appreciated

http://seatcupra.net/forums/showthread.php?t=388496

 

[Gingerbread Man]

tried fixing my car.. still broke.

Any help appreciated

http://seatcupra.net/forums/showthread.php?t=388496

Iv followed your thread an unfortunately I don't have a clue how ever I hope you get it sorted bud

Sent from my Nexus 7 using Tapatalk 4

 

[Greavesy]

Completed a 1300 mile trip round the Scottish Highlands. Car was awesome, had great fun on some of the roads and it didn't put a foot wrong.
A photo from Bealach na Ba aka the pass of the cattle.

Absolutely loved it, amazing scenery, great food and lovely people!

 

[diddles]

Fitted a block breather pipe and seal and broke another pcv pipe, opps. Creation motorsport replacement on the way, garden hose will have to do for now!

 

[Dave_Cupra88]

Did the n249 bypass yesterday. DV sounds a bit odd now though. Is this right?

http://www.youtube.com/watch?v=KtPKGmNAYck

 

[diddles]

Will this fit a bam engine?

 

[bigjon]

fitted the rear seats from a cupra r into my 150pd FR, but the fronts need some repair work before i fit them, and fitted a brand new retrimmed steering wheel.

jon

 

[RaviR50]

ive wrapped the mirrors in the unique monsterwraps exclusive 4D gloss carbon fibre vinyl this really is sooooo much better than the matte shite other people use

for once mine and dads car were parked next to each other so obviously had to take a photo

and the car had its birthday