fine

  1. Cal91

    Remove fine chip/scratch from windscreen.

    So I have some very minor chips on my windscreen from a stone. It's 3 very small chips. I have been to AutoGlass and they said it's too fine to repair. So how would I repair this? Would a glass polishing kit work?
  2. 1.2 not starting, turns over fine but doesnt catch

    drove fine and didnt have a problem until yesterday morning just wouldnt get going. i thought it might be the battery but jumping it didnt help. three new spark plugs did nothing either and they all fire so i'm assuming its not coil related? turnover sounds smooth so i assume (hope) its not the...
  3. Engine starts and revs fine, but wont idle - it just dies!!!!

    Hi Guys, I have a 2L 8V that has been getting progressively worse. Historically, when you stopped driving and put the clutch down the revs would fall and it would nearly stall, dimming all the lights and cluster etc. (i say driving because it was always fine when stationary in neutral...
  4. MK4 Cupra Power loss, then fine again?

    I was driving last night and accelerating in 3rd, reached about 3500 rpm and suddenly a loss of power. The car was completely dead the whole way home. (felt as if no turbo). Stopped the engine and restarted it, just before home and it was fine again. Any suggestions as to what it could...
  5. jamesypyk

    05 . lcr. 120 degrees dont worrie its fine !!!!!

    Big problem well not according to SEAT ALEXANDRIA PARADE [:@]GLASGOW.:censored: Well hears my stroy car has just had its water pump done belt and tensioner because i was getting high temp readings there for it was changed.:D Only for it to happen agian. So back to UNCLE ARNOLD it went...
  6. 6K2 Cupra - Lambda logs - do they look fine ?

    Recently I found following error in ECU : 17536 - Fuel Trim: Bank 1 (Mult): System too Lean P1128 - 35-00 - - I'm suspecting pre-cat lambda fail , so I've logged group 001 and 032 group 032 first block 0% second block -6,3% group 001 lambda % vs RPM On Ross-tech...
  7. Nath.

    The FR is all Fine and dandy

    Well with all the threads on here about dpf's and limp modes and all the other faults. I thought I would post up and say that my FR is running like a dream and has no faults or issues. My wing has been repaired and it looks like new. Fuel consumption is good. No funny noises. Everything works as...
  8. diagnosis/excess of pollution light - car seems fine

    since my LC has been out of warranty i've had one problem after another. the latest is the diagnosis/excess of pollution light. this came on the other day. however, car still drives as per usual, and i've checked the oil etc and they are all fine, the exhaust doesn't sound any rougher...
  9. chris285

    headgasket is fine :D

    took my car in to another garage for a second opinion to my lack of heat in my car, had been previosly told by the other guy likely cause was headgasket got my mates dad an ex lotus f1 mechanic to look at his garage, was the water pump that had gone after all that. also getting cambelt...
  10. Cupra_J_RS

    Problems using a laptop for VAGCOM when my desktop PC works fine!

    My vagcom cable is recognised when testing on vagcom via my desktop computer, but when i do the exact same process on my laptop, vagcom displays the warning 'interface' not recognised'. Any suggestions? I've sat down for hours trying to work out why, i've compared all the settings on my...
  11. paullec

    Working fine ??

    With my lcr being collected this saturday i keep reading about problems :( Any one cars on song at the moment :lol: Cheer me up and and support me that ive made the right choice :D ;)
  12. jonjay

    One fine evening: a learning experience

    Well my best friend got himself a brand new Seat Leon Cupra R in platinum grey. Its superb car as many of you know and we thought we take a long evening drive to clock up some miles so it can be run in. I am getting my FR TDI next month i hope. Yesterday evening on our travel's in and around...
Chris Knott Insurance - Competitive quotes for forum members