lines

Hello, Some months ago I bought a Seat Arona without a reverse camera. So I bought one from the Seat shop and let the Seat garage install it. I tested it and it worked, but didn't payed attention to the lines. A day later when reversing I noticed it. So I contacted the garage. They said that...

Im taking the car off the road for a week as I have a list of jobs to do. One of the main items on the list is to remove the Brembo callipers, strip them down and rebuild with new seals.etc and paint. As I will be removing the callipers from the car completely for a few days I dont want...

as above really i am after a set of brake lines to fit a new set up and was wondering i the mk5 polo brake lines would fit a cupra ? or should i just talk to bill?:think:

Anyone know if the Seat Toledo MY2002 brake lines are the same a Golf 4 / Audi A3 ones? I've been looking at a set from http://www.helcarkits.co.uk/ and they do ones for Golf and Audi but none for Seat Toledo or Leon Cheers Mark.

Hi all, done a few searches and noticed all leons seem to have poor braking and people upgrad to the ds2500s with a fluid change. But my question is this do braided brake lines make much of a difference to the firmness of the pedal. My brakes lock on full but only when the pedal is about 2...

as above. wanting to get some as the brake fade on the car is pants, and teamed with some decent fluid should make a big difference. goodridge dont appear to do any but hopefully someone can shed some light on the situation ed

Looking into getting my brembos refurbished very soon as the laquer is peeling:( Im also going to upgrade to braided hoses all round. I found some but it only says there for a leon cupra the part number for that is SSE0401-4 but i dont know if these will fit the cupra r with the brembos...

Good afternoon people, right im after a diagram or input from everyone and anyone on here for where all the vacuum lines go in our beezas, this includes from the forge tip and from the turbo (ko3s so only one line), n75, manifold, fpr etc etc. ive searched and all that comes up is the famous...

Hi Guys, did a search an did find results but no real answers. Goodridge dont do a kit and either do HEL for a mk3 cupra Does anyone know if for instance another kit would fit, ie golf gti 150 ??????????? thanks

so since getting my car been doin a lot of reading was wanting to replace my vaccum hosing with silicon hoses.was gonnna buy 3m of 4mm hose online.how much do you thing it would cost a garage to fit it for me not confident on what hoses to change or any1 local to me do it for beer money?stay...

I'm in the middle of replacing the vac lines on my cupra. So far I have changed the ones going to the n249 (thingy on top of coil packs) for 3mm silicone tubing. Can I use 3mm for the top of the dump valve, fpr, and the egr valve. Had a look at the existing tubing from the d/v and 3mm...

Hi all, goin to pop some 2.7 Boxster calipers on my leon cupra this winter me thinks. just wondered if lcr 225 front flexys will fit of not?? also i have 18" OZ superlegras fitted. will i need to space them 25mm?? last thing i want is to pop car on the ramp, fit brakes and wait 2-3 days...

hi guys did an oil and filter change today. Went to do my fuel filter at the same time, but, the inlet pipe that goes straight into the filter wouldn't come off! its completely stuck on. Anyone got any ideas how I can get it off? the only thing I can really think of is slice it off...

hi all hope some one can help im after some braided lines for my ibiza gti 16v but as its the 16v its fitted with the 280mm brakes i carnt seem to find lines for it goodridge only list lines upto 1996 with the smaller brakes does anyone know if they have the same fittings or knows anywhere i can...

Afternoons gentlemen now this time i have done a search but to no success can anyone tell me if the brake lines an a LCR are braided as standard just with a rubber coating or can you buy a goodridge braided hose set. Asked at Awesome on sat but we both came to the same conclusion the Brembo GT...

My Leon is 3 weeks old (aaaaaahhh!) I have washed it three or four times using a mitt, two buckets and Autoglym shampoo. Dried using Flash car wash dioniser (didnt use the flash shampoo as it seemed a bit 'fairy liquid'). I've coated the calipers and hubs in high temperature laquer so they're...

this may happen. http://atsearch.autotrader.co.uk/www/CARS_popup.jsp?nU=0&make=SEAT&model=LEON&min_pr=10000&max_pr=&postcode=CW9%206ED&miles=40&max_records=200&modelexact=1&photo=1&hassearched=Y&start=9&distance=24&adcategory=CARS&channel=CARS&id=200727290795590 not a fan . pete

I've installed a ko3s to my cupra, but now noticed that i have a small oil/water leak from the oil/water lines to the turbo. (I think) only small drips. Only noticed the other day as i was doin checks to make sure eveything was ok. When fitting the lines i just done a straight swop over...

i can buy a complete golf g60 brembo kit, the brake kit must fit on our ibiza's but wil the brake lines fit to? grtz

Looking for buying a brake kit for my car. Any recommendations on where and how much should go for? Will a kit for the cupra-R fit the std. Cupra? Thanks mates