reading

Hi, my 1.4tsi fr Ibiza (2015) is coming up to temperature as normal (thermostat dial accessed through garmin Satnav). however I’m finding whilst driving in almost any circumstance, the dial is fluctuating between 80-90 degrees, but never sitting still at 90. when upping the Revs it rises and...

Hi all, My engine warning light came on yesterday so I need to read ECU fault codes ASAP. Beer tokens available. Can anyone help? Cheers 8bit

Evening all. hello to every one in Reading and berkshire area. My name is Mark and i am one off the sales team at Emmer green, been with Seat now over just over two months and loving it. If any one wants prices for parts or looking for a new car then please drop me a line or pop in. Have a...

Just wondered if anyone has used Pentagon In Reading for tinting their SEAT. Im considering booking my Leon (Being built this week) to have rear factory identical tint and apparently can have front sides slight UV tint as well (obviously staying within legal limits). They sound pretty good and...

Component: MARELLI 4MV 5018 Coding: 00071 Shop #: WSC 00488 WVWZZZ9NZ3Y102783 VWZ7Z0B5625101 1 Fault Found: 16804 - Catalyst System; Bank 1: Efficiency Below Threshold P0420 - 35-00 - - Readiness: 0000 0000 car is a 1.4 100bhp. cant...

Can anyone advise what sort of MAF g/s reading I should expect on my LCR 225? I was thinking of 169 g/s going on conversion of 222bhp / 1.31. The only mod is a K&N 57i cone filter. I will try and post log later. I assume 003 and 020 groups would be ok for this. (I don't have full...

1.8T BBU - Where does the instrument panel get it's temp reading from? I know it is NOT the coolent sensor to the right of the lump. I see no wires from the thermostat housing, it is not the sensor in the rad, it is not what i suspect is the knock sensor in the middle of the lump at the...

Removed mine this week, been on a few website to try and read them but to no avail. Anyone know what state mine are in? They were a little bit oily around the thread when i removed them but i guess thats normal? Pics: Thanks

Hi Guy's, Got round to fitting my boost and oil temp gauges today, fitted the halfords ones. My boost is peaking at 22psi and settling between 17 and 18psi. Obviously modified to my signature but is it anygood?

I have VAG-COM and want to program extra keys for my 2002 Leon 1.6S. I read the instruction in the Ross-Tech site but need the 4-digit code to Log - In to code the keys. Does anyone have a software tool for sale that will read PIN codes using a Serial VAG cable? Thanks.

Hi Guy's, Just after some info please. Planning on purchasing a CAT back system for my motor and want to know if anybody can tell me what sort of decibel readings they get (if you have ever checked it!). The systems I am looking at are the Blueflame, Milltek and Piper. I have already...

does anyone know if its possible to change the bulb in the reading light because i want to get a red one if they even exist.:think: i found an interior light on ebay but it doesnt specify where it goes.:confused: heres the link...

Hi all, Had the car a week and have changed the Temp Sender from a Black to a Green one as I was getting the G62 faults on VAG-COM. Got the replacement Greeny (059-919-501A) from Fleabay and fitted. Two long test drives an dthe temps are showing funny. Yesterday would go above 75c...

Hi all, could anyone help please. I have an 04 Ibiza, the engine diaognosis light has recently come on and staying on. Also the outside temp reading(the one near the heater control) is always reading 4.5 degrees. Have these two faults got anything in common? Also the Air con is not working...

Just been checking my MFA MPG reading and its a bit highter that it realy is, first things first people how have MFA's how accurate do you thing the readings from it? also is there anyway to ajust it? I know on my old Mondeo there was a way to get into the settings and ajust it for a better...

Just checked my Maf readings at idle on my scangauge it reads between 13.2 and 13.8 does this sound correct?

Hi, I have used the search but can't find anything relevent. Basically my car has always felt like it pulls very strong at low rpm but tends to drop off higher up quite a bit. I fitted a boost guage earlier and it goes up to 1.3 bar in third gear by 4k rpm, then it slowly drops down and...

I have a terrible flat spot on one of my cupra R's - I've tried all sorts to fix it but am at my wits end! so far i've had the following done but to no avail: New Boost Controller Sensor, New Mass Air Flow Meter, New Platinum Plugs, also had it remapped to see if that would cure it...

Have a problem with the water temp gauge on the dash, 95% of the time its fine but sometimes it seems to stick at 0 then shoot straight up to full temperature after a long period of driving, any idea's on what going to be the most likely cause of the problem temp sensor or thermostat ...

finally got round to wiring in my oil temp gauge today, and im a little concerned that my oil temp is low ive read it should be between 80-100 degrees C here is a pic of as high as it goes it didnt rise any higher than this and i was driving for a good 40mins is it cos of the...