recirc

I know the law is to buy a Forge 007p However I have a 'similar' internet branded recirc valve arrive today, It came with 3 springs, The thickest one was already fitted, However I swapped for the middle sized yellow one.. My car is remapped and has stage 2 mods,... I installed the...

Has anyone else experienced problems with the recirc function of the climate control. When i press the recirc buttton(or reverse) the fans sound as if they are blocked and no air comes out. Apart from that the climate control works fine. Car is still under warrenty and is due a service but...

Hi guys i am on a post frenzie lol this is the last for today... honest anyway need your advice as i dont no what to do here, i dont no what to buy out of the above, i no a dump valve just dumps to the atmosphere and does nothing for power etc, i currently have the a forge recir valve...

I was about to service my forge 007p tonight. Ive got the old sort 077p, and can't unscrew the top. Just wondered if anybody has any ideas on how to get the top off ? It's so tight,don't think it's been off in years. Thanks

Is it a case of it replaces a known faulty part or it is a perfromance upgrade?

Anything to watch for when changing out these valves? I have the new OEM spring recirc valve and a complete PCV assembly with gasket as I was seeing a flat spot at approx 5200rpm prior to taking some of the uprated parts off my car. I now understand this flat spot has been seen on several cars...

I know not all of u think it's a good idea but I wanna see for myself if I like it lol, after fitting a dv26 valve (atmospheric not recirc) what's best to use to plug/block the recirc hose? I don't wanna buy through bailey sometiing that I may find in b&q :) so has anyone done this before or got...

hi i had my LCR remapped with custom code, i have a forge splitter fitted but when i had it remapped the car kept going in to limp mode so i put in full recirc (the car runs SOOOOOOOOOOOOOOOOOOOOO much better) but i was just wondering whether i stil have to worry about the different setting when...

Hi just picked up my new lcr this morning and have found that when you let off the throttle rather than have the normal woosh of the recirc valve i get a squeal like an old bed spring lol what would be causing this? would i be needing a new spring or a rebuild kit? would like to keep the...

As the Proud owner of a new LCR, this car is my first turbocharged car and i've always wanted that "dump" valve noise. I'm caught between the Forge 007p and the Splitter R Recirc Valve, What are the major differences between the two and which is louder? Also, how hard is fitting either (Im a...

Hi, First post!! couple of questions i could use a bit of help with!! firstly:re-circ dv on a Ibiza FR how many do you need?? may sound stupid just saw somewhere that you needed 2? secondly: are they easy to fit!? thirdly: what is better induction wise... uprated panel filter, enclosed...

Hi All I have had my car for a whole day now and NEED to ditch the chump valve- I was going to put the standard re circulating one back on but I havent got it in the spare parts box. SO- what are they the same as so I can have a good search on flea bay and see if someone is selling one...

I know this has been asked many times, but i've spent hours looking through all the posts relating to it, and not come up with a clear cut answer. My cupra is currently running jabbasport stage 1, std turbo etc (think boost peaks at about 20psi, and drops to 12-13psi), altho i can't say i've...

http://www.thettshop.com/performance.asp?cat=&product=600202 thanks in advance

got a new forge recirc valve and was going to attempt to fit it today but i dont have any instructions, has anyone fitted one and could give me a step by step to fitting it, i had a look on the forge website but i could only find a guide to fitting the atmospheric adaptor cheers owen

Does this part make a noticable difference to lag ? If so should i go with the 50/50 split or total recirc ? Thanks,

just been fitting my forge recirc valve. took the old one off got the first pipe of the new one on and then ...... doh i dropped a hose clip into the engine bay:doh: can't see it anywhere. jacked the car up and still cant see it underneath. I'm just about to go and get a new clip so thats...

im currently running a Forge 007 DV on my ibiza, their are a few out their though that are meant to be louder and more efficient but still a re-circ (wouldnt touch a atmospheric one on this car) iv looked at the Bailey DV30 and the Forge Type RS Valve, are their any others and which one would...

My Car is at stage 1 at the mo, i put the standard recirc valve back on today just to see what it sounded like through the induction kit, it makes an awesome Fluttering noise, is this harming anything apart from the standard bosch valve?? i know the fluttering noise is coming from the diaphram...