what injectors do you have in your PD140?

Hi mate, just the standard injectors, whole car is standard bar the turbo and remap. I was thinking in time id maybe upgrade the injectors. Any of you fokes from NI.
 
Hi mate, just the standard injectors, whole car is standard bar the turbo and remap. I was thinking in time id maybe upgrade the injectors. Any of you fokes from NI.

Its funny then as the 2.0 tdi PD140 injectors can't fuel for 230 bhp and a stage 1 remap can't make 190 bhp either
 
Its funny then as the 2.0 tdi PD140 injectors can't fuel for 230 bhp and a stage 1 remap can't make 190 bhp either

Well tbh i cant say as i dont no much about these things. This is the story, when i 1st took the car to get maped it was puting out 158bhp or so on the rolling road i cant just mind wat it was, the fella took it to 190bhp or so. Unless the owner b4 hand has put other injectors in the car i dont no. 5 years or so later the turbo started given me probs, i didnt no it was the turbo at the time, the car kep going into limp mode so i took the car back to the fella that maped it thinkn it was something else. So instead of fixn the standard turbo i got a hybrid an another remap. Fella had the car a week i went to pick it up. He shows me the print out 232bhp an 370lb/f torque.

I dont no enuf to say but thats wat hes showed me an the car has a hell o of power than it had b4. My best mates have honda civic type r ep3, 1 has a 2009 GTI golf an 1 has a mazda RX8, my leon is now faster than all of them. Not alot faster but i can get past them tho they have more topend speed .

So i dont no if its 232bhp but thats wat the print out said an the car is able to beat 3 petrol cars in about 200bhp. But thats all the mods i have done to this car, turbo and remap.
 
I took a vid of the car 30-100mph - 13sec. I shall post it up if it helps prove anything lol
 
Lol il try tomora eve after work. Il have to upload it to utube.
 
Wont let me post it here, not sure why but its on u tube, search Robert Heaney 0-60. The 30-100 is there 2 so go have a wee look
 
Last edited by a moderator:
Just had a run with my FR TFSI DSG
Finally a proper use for the launch control
The numbers are in kph

ze5atuby.jpg

hupyrapy.jpg
 
lol 13 seconds to get from 30 -100mph isnt slow but its definately not fasr either!!! Why wouldnt you believe that?

My K1 did 0 - 110 in 13.1 seconds when in was standard hardware with stage 1 map. That was measured at crailraceway and 13.2 at Santapod.

Ive still just got stage 1 map but now have forge twintake, 3" turbi back decat and forge dv and its def quicker so dunno what it is now ....

....was hoping to find out tomorrow at crail but feckin mothers day has gotten in the way! lol
 
lol 13 seconds to get from 30 -100mph isnt slow but its definately not fasr either!!! Why wouldnt you believe that?

My K1 did 0 - 110 in 13.1 seconds when in was standard hardware with stage 1 map. That was measured at crailraceway and 13.2 at Santapod.

Ive still just got stage 1 map but now have forge twintake, 3" turbi back decat and forge dv and its def quicker so dunno what it is now ....

....was hoping to find out tomorrow at crail but feckin mothers day has gotten in the way! lol

Aye i would agree with you, i didnt think it was fast buy no means lol but it isnt to bad for a remapped tractor lol. Did you have a look at the 2 vids mate. Mothers day i almost forgot about that :eek:
 
lol 13 seconds to get from 30 -100mph isnt slow but its definately not fasr either!!! Why wouldnt you believe that?

My K1 did 0 - 110 in 13.1 seconds when in was standard hardware with stage 1 map. That was measured at crailraceway and 13.2 at Santapod.

Ive still just got stage 1 map but now have forge twintake, 3" turbi back decat and forge dv and its def quicker so dunno what it is now ....

....was hoping to find out tomorrow at crail but feckin mothers day has gotten in the way! lol

To be completely fair, I'm not surprised a stage 1 K1 (300bhp?) is faster than a 230bhp diesel.