100Pd upgrade to 312mm setup

[maxcars1]

But what about the bearing carriers are they a logical straight swap over form these cars? I've defo got 2 x Leon 20vs and 1 x Toledo 20v sat waiting to be robbed.

 

[stoneyfordNI]

i take it ur talkin about the actual hub housing

 

[stoneyfordNI]

different part nums , only the first bit , the actual application bit , (ie ibiza leon toledo bit) could u not compare them

 

[maxcars1]

i take it ur talkin about the actual hub housing

Yep the housing - seems a long winded way and expense of removing them at the breakers ( manhours) just to physically compare them. Obviously, I'm trying not to pay £180 for these housing. I've aslo found a 54 plate Leon Cupra that I assume I could rob the discs/calipers and carriers from.

 

[stoneyfordNI]

discs , calipers yes , not sure about hubs n housings

 

[mrcoyote]

Would the bits from here fit?

http://www.seatcupra.net/forums/showthread.php?t=74315

 

[stoneyfordNI]

yes on the calipers n carriers , discs will be 312 not 318 , dunno bout hubs , i take it hoses r included

 

[maxcars1]

Does the MK4 1.4 Sport have the same set up as the 100pd?

 

[stoneyfordNI]

yes 256mm dics u need the 312mm setup plus hubs from a 130PD ibiza/fabia