20mm spacers with standard Cupra wheels

[Robbie C]

Anyone had any rubbing issues running 20mm spacers on the standard Cupra alloys when lowered?

I'm running 15mm on the back at the moment but they still don't stick out as much as I'd like.

TIA,

Rob

 

[Ibiza125]

I did long ago when I had my 1.4 with mk2 GTi wheels (same size as Cupra), but that had very soft suspension!

I think other people have managed 20mm on lowered cars.

 

[M87NER]

i have 20mm on rear with standard cupra rims lowered with h+r kit and it rubs the outside off the tyre wall if i go in a big ditch/dip fast. hardly ever though so is worth it.

 

[weekesj]

Tiny bit of stretch on the tires might cure slight rubbing issues?

20mm looks so much better than 15mm.

 

[Brummy]

I have 20mm spacers and use them with both my 15"BBs rims which are 6j wide and my wide rim 16" which are 7.5 wide and get very little scrubbage tbh. (only as said , with a car-load and rough terrain)

 

[tom w]

mine only used to catch on rough b roads/speedbumps and if i had a fat mate in the back

 

[Davem]

down about 40mm.. 20mm spacers on rear of mine and get abit of scrapping when got someone in back and hit a bad ditch at speed. so nothing to worry about.

 

[s1l3nc3r]

Ive just put 20mm on mine not lowered yet but from the look of it should be ok close but ok...

 

[dubz_wm]

mine is slammed....ish on 20mm rears with alot of stretch and i do get the occasional rub, but nothing really to worry about tbh. well worth it for the handling and the stance.

 

[CupraElliott]

Mine were. But mines right on the arch.

I just tapped the lip in on the arches with a little hammer and it's spot on now.

 

[Robbie C]

Cheers for the replies - 20mm it is then

 

[johno1404]

Cheers for the replies - 20mm it is then

I might be interested in having your 15mm spacers off you depending on price?

 

[Robbie C]

Already had a few people ask about these - this needs to go to PM though